Leave your address - as soon as the price of the product goes down, you'll know about it right away
Wall switch Ospel ŁP-3Y/m/00 White — 16 A, 250 V, IP20, 71×71×40 mm
Wall switch Ospel ŁP-3Y/m/00 White — 16 A, 250 V, IP20, 71×71×40 mm
In cart {{totalProductsCount}} item(s)
Your cart is empty
Wall switch Ospel ŁP-3Y/m/00 White — 16 A, 250 V, IP20, 71×71×40 mm
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Wall switch Ospel ŁP-3Y/m/00 White — 16 A, 250 V, IP20, 71×71×40 mm
Wall switch Ospel ŁP-3Y/m/00 White — 16 A, 250 V, IP20, 71×71×40 mm
Ospel ŁP-3Y/m/00 White is a compact wall switch designed for standard indoor electrical installations. Rated for 16 A and 250 V AC, this single-gang switch provides reliable control for lighting and general switching circuits. Its IP20 protection rating indicates suitability for dry, indoor environments, while screwless terminals simplify wiring and reduce installation time. The device measures 71 × 71 × 40 mm, fitting typical mounting boxes and finishes in a neutral white suitable for many interiors.
The switch supports a nominal current of 16 A and voltage of 250 V, enabling safe operation with common household and commercial lighting loads. Screwless terminals offer easier, tool-free connection and help achieve secure contact without exposed screws. The compact dimensions and single-gang format ensure compatibility with standard mounting boxes and plates. IP20 protection provides basic safety for indoor environments where moisture and dust exposure are minimal.
Turn off the power supply at the circuit breaker before starting installation. Mount the switch into a compatible single-gang wall box and secure it according to local electrical regulations. Connect the live and switched live conductors to the screwless terminals following the manufacturer's wiring diagram; ensure conductors are stripped to the recommended length and fully inserted for secure contact. After connections are made and the faceplate is attached, restore power and test the switch operation by toggling the actuator to confirm correct switching of the intended lighting or load circuit.
Use this switch only in dry, indoor locations consistent with its IP20 rating. Verify that the connected load does not exceed 16 A or the corresponding power at 250 V. For installations involving dimmers, motor loads, or circuits with special requirements, consult an electrician to select compatible devices and ensure compliance with local electrical codes.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}