Electrical switch Ospel ŁN-6B/24, brown, 10 A, 250 V AC, IP20, 60×60×37 mm

Ospel ŁN-6B/24 is a single-pole electrical switch in a brown finish, designed for flush mounting in standard domestic and light-commercial installations. The switch is rated for 250 V AC and a nominal current of 10 A, with IP20 protection and compact dimensions of 60×60×37 mm. It is intended for controlling lighting circuits and other simple resistive or low-inductive loads and fits standard 60 mm mounting boxes.

Advantages

The device features screwless terminals for quicker and cleaner wiring, a compact housing that conserves wall space, and a neutral-coloured brown design that blends with many interior finishes. With an IP20 rating it is suitable for indoor environments and provides reliable electrical switching at up to 10 A. The construction follows common electrical installation standards, enabling straightforward replacement or installation in existing switch points.

Suitable for

• Switching indoor lighting circuits in homes and apartments
• Controlling simple resistive loads such as heaters or incandescent lamps (within rated current)
• Use in offices, corridors, and light-commercial rooms with standard flush-mount boxes
• Replacement of existing single switches during renovations

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A (10 AX switching capacity)
• Maximum load power (resistive): up to approximately 2200 W at rated voltage
• Ingress protection: IP20 (protected against solid objects ≥12 mm, not protected against water)
• Mounting type: flush-mounted for standard 60 mm switch boxes
• Dimensions: 60 × 60 × 37 mm (width × height × depth)
• Terminal type: screwless terminals for conductor connection
• Finish: brown

How to use

Before installation, switch off the circuit breaker and verify the absence of voltage at the wiring point. Mount the switch into a compatible flush-mount box and connect live and switched live conductors to the designated terminals using the screwless connector system; ensure conductors are stripped to the correct length and fully inserted. Secure the device in the box and attach the cover plate. Restore power and test the switch operation by toggling the actuator to confirm correct switching of the intended load.

Usage recommendations

Use the switch only in dry, indoor conditions consistent with its IP20 rating. Do not exceed the nominal current or recommended load power. For circuits with inductive loads (motors or ballasts) verify compatibility with the switch's switching category and consult an electrician if necessary. Periodically inspect for secure connections and replace the device if mechanical wear or electrical failures are detected.