Wall-mounted smart switch Ospel ŁP-17U/m/00, 10 A, 250 V, IP20, white, 71×71×40 mm

Ospel ŁP-17U/m/00 is a wall-mounted smart switch in white with IP20 protection, designed for alternating current installations at 250 V and a nominal current rating of 10 A. Its compact body (71×71×40 mm) fits standard flush and surface boxes used in residential and light-commercial electrical systems. The device provides reliable on/off switching for lighting circuits and simple loads, with a screwless clamp connection system for faster wiring.

Advantages

The switch combines compact dimensions and a neutral white finish suitable for most interiors. It supports nominal currents up to 10 A at 250 V AC and meets IP20 protection level for indoor use. Screwless clamps speed up installation and reduce the need for additional terminal tools. The device is compatible with common single-gang mounting practices and is intended for straightforward replacement or new installations in living rooms, corridors, kitchens or small offices.

Suitable for

• Controlling indoor lighting circuits in homes and apartments
• Switching basic resistive or low-power inductive loads up to 10 A
• Use in corridors, kitchens, bedrooms and small commercial premises
• Flush or surface mounting in standard single-gang boxes

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A
• Protection class: IP20 (indoor use)
• Mounting: wall-mounted, fits standard flush or surface boxes
• Dimensions: 71 × 71 × 40 mm
• Connection type: screwless clamp terminals for conductor insertion
• Color: white

How to use

Install the switch into an appropriate single-gang mounting box following local electrical regulations and safety practices. Ensure power is disconnected before wiring. Insert conductors into the screwless clamp terminals and verify secure contact according to the installer instructions. After wiring, restore power and test the switch by toggling the control to verify correct operation of the connected lighting or load. For reliable operation, avoid exceeding the rated current and voltage.

Usage recommendations

Use the switch indoors where IP20 protection is sufficient; avoid exposure to moisture or direct water contact. For loads near the nominal current limit or for motor-type loads, consult load characteristics and, if necessary, select a device with a higher current rating or add suitable protective devices. Regularly inspect connections after installation to ensure continued secure contact.