Switch module Ospel ŁP-1Y/m/50, anthracite, 16 A, 250 V, IP20, 71×71×40 mm

Ospel ŁP-1Y/m/50 is a compact, anthracite-coloured switch module designed for indoor electrical installations. It is intended for controlling lighting and small electrical loads in residential and commercial spaces. The module is built to fit standard wall-mount switch openings and combines a compact footprint with common mains ratings to serve everyday switching tasks where IP20 protection is sufficient.

Advantages

The switch module offers a 16 A nominal switching capacity at 250 V AC and supports loads up to typical lighting and small appliance levels. Its screwless terminals simplify installation and provide reliable conductor connection without separate screw tightening. The anthracite finish integrates with modern interior decors while the compact 71×71×40 mm dimensions make it suitable for standard switch frames. IP20 protection ensures safe indoor use where no direct moisture exposure is expected.

Suitable for

• Wall-mounted control of indoor lighting circuits in apartments and houses
• Switching small loads in offices, corridors and common areas
• Replacement or upgrade of existing standard switch modules with similar dimensions

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 16 A
• Approximate continuous power at rated conditions: up to 3520 W (at 220–230 V)
• Protection rating: IP20 (for indoor use)
• Finish: anthracite
• Terminal type: screwless terminals for tool-assisted insertion
• Dimensions: 71 × 71 × 40 mm

How to use

Mount the module into an appropriate wall box or switch frame that accepts the module's dimensions and secure electrical connections according to local wiring standards. Ensure the mains supply is switched off before making any connections. Insert wires into the screwless terminals following polarity and grounding requirements, then restore power and test the switch operation with the intended load. Use the module only in dry indoor locations consistent with its IP20 rating.

Usage recommendations

Verify compatibility with existing switch frames and the electrical load before installation. For circuits containing inductive loads or dimmers, confirm suitability with the load type and consult technical guidelines if necessary. Installations should be performed by a qualified electrician in accordance with local codes.