Electrical switch Ospel ŁP-2AS/24, single-pole 250 V AC, 10 A, brown, 82×82×36 mm

Ospel ŁP-2AS/24 is a single-pole electrical switch in brown, designed for conventional wall installations where basic protection and reliable switching are required. The device supports alternating current up to 250 V and a nominal current rating of 10 A. With compact dimensions of 82×82×36 mm and IP20 protection, this switch is intended for indoor use in residential and commercial interiors and is suitable for controlling lighting circuits and other simple electrical loads.

Advantages

This single-pole switch features screw terminals for secure conductor connection and a standardized form factor that fits most flush mounting boxes. The rated 10 A current and 250 V AC compatibility make it suitable for common lighting loads. Its compact build and neutral brown finish facilitate discreet installation and straightforward replacement of existing switches without modifying wall openings.

Suitable for

• Controlling indoor lighting circuits in homes and apartments
• Switching basic electrical loads in offices and commercial premises
• Replacement of standard single-pole switches in renovation projects
• Use in rooms where IP20 protection (protection against solid objects >12 mm) is adequate

Key specifications

• Contact configuration: single-pole
• Rated voltage: 250 V AC
• Rated current: 10 A (10AX)
• Max switching power for incandescent/ resistive loads: up to approximately 2200 W
• Protection class: IP20 (indoor use)
• Termination: screw terminals
• Material finish: brown plastic housing and rocker
• Dimensions: 82 × 82 × 36 mm (width × height × depth)

How to use

Before installation, cut power at the relevant circuit breaker and verify the absence of voltage. Mount the switch into a compatible flush mounting box and secure with appropriate screws. Connect the live conductor to the common terminal and the switched conductor to the load terminal using the screw terminals; ensure conductors are properly stripped and tightened to the recommended torque. Restore power and test the switch operation by toggling the rocker to confirm correct switching of the lighting or load.

Usage recommendations

Use this switch only in dry, indoor locations where IP20 protection is sufficient. Do not expose the device to moisture or outdoor conditions. For circuits with inductive loads or higher inrush currents, verify suitability with an electrician. For safe and compliant installation, follow local wiring regulations and, if uncertain, engage a qualified installer.