Leave your address - as soon as the price of the product goes down, you'll know about it right away
Wall Switch Ospel ŁP-2Y/m/50, 16 A, 250 V, IP20, Anthracite, 71×71×40 mm
Wall Switch Ospel ŁP-2Y/m/50, 16 A, 250 V, IP20, Anthracite, 71×71×40 mm
In cart {{totalProductsCount}} item(s)
Your cart is empty
Wall Switch Ospel ŁP-2Y/m/50, 16 A, 250 V, IP20, Anthracite, 71×71×40 mm
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Wall Switch Ospel ŁP-2Y/m/50, 16 A, 250 V, IP20, Anthracite, 71×71×40 mm
Wall Switch Ospel ŁP-2Y/m/50, 16 A, 250 V, IP20, Anthracite, 71×71×40 mm
Ospel ŁP-2Y/m/50 is a single-gang wall switch in an anthracite finish designed for standard residential and light commercial installations. The switch is rated for alternating current up to 250 V and a nominal switching current of 16 A, with an IP20 protection rating. Its compact housing (71×71×40 mm) fits typical flush-mounted back boxes and provides a clean, unobtrusive appearance for controlling lighting circuits and other compatible mains-powered loads within its rating.
The switch offers screwless terminals for faster and neater wiring and a rated load capacity that supports common lighting and small appliance circuits. Its anthracite color and compact form factor integrate easily into modern interiors. The IP20 protection level is suitable for indoor use where the switch is not exposed to moisture or dust ingress beyond typical indoor conditions.
Turn off the circuit breaker or isolate the circuit before installing or servicing the switch. Install the device into a compatible single-gang flush-mounted back box and secure according to local electrical codes. Make connections to the screwless terminals following the polarity and wiring scheme appropriate for your installation (live and switched live conductors). After wiring, restore power and test the switch operation by toggling the actuator to verify proper control of the connected load. Use only within the specified voltage and current limits.
For safety and reliable operation, use this switch indoors only and avoid exposure to moisture. Ensure the connected load does not exceed the rated current and power. Have installation and any maintenance performed by a qualified electrician in accordance with local regulations.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}