Wall switch Ospel ŁP-3G/m/00 — 3-gang mechanical switch, white, 250 V, 10 A, 71×71 mm

Ospel ŁP-3G/m/00 is a three-gang mechanical wall switch in white designed for standard indoor electrical installations. The switch fits standard flush mounting boxes and provides manual control of up to three separate lighting circuits or other compatible loads. Its compact faceplate measures 71 × 71 mm and the complete unit depth is suitable for typical domestic and commercial wall cavities. The device has IP20 protection for indoor use and is built to operate at line voltages up to 250 V with a nominal current rating of 10 A.

Advantages

The switch offers straightforward mechanical operation with durable rocker actuators and screw terminal connections for reliable wiring. Compact dimensions allow neat installation in confined wall boxes while the white finish integrates with common interior styles. Rated for up to 10 A at 250 V, the unit supports standard lighting loads and general-purpose circuits within its electrical limits. IP20 protection ensures appropriate safety for interior environments.

Suitable for

• Controlling multiple indoor lighting circuits in homes and offices
• Switching small electrical loads such as fans or low-power appliances within the rated limits
• Replacement or new installation in standard 71×71 mm flush mounting boxes

Key specifications

• Number of gangs: 3 (three separate rockers)
• Rated voltage: up to 250 V AC
• Rated current: 10 A (10AX switching capability)
• Power handling example: up to 2200 W resistive load at rated voltage
• Protection rating: IP20 for indoor use
• Connection type: screw terminals for fixed wiring
• Faceplate dimensions: 71 × 71 mm; overall depth ~40 mm for standard flush boxes
• Finish: white

How to use

Switch operation is manual: press each rocker to toggle the corresponding circuit on or off. Install the unit in a compatible flush mounting box using appropriate mounting screws and connect live and neutral conductors to the screw terminals following local electrical standards and wiring diagrams. Ensure power is disconnected at the supply before performing installation or maintenance. After wiring, restore power and verify each gang controls the intended circuit.

Usage recommendations

Use the switch for indoor applications only and do not expose it to moisture or external elements. Confirm the load connected to each gang does not exceed the rated current and power. For installations involving inductive loads, motors, or special lighting (e.g., LED drivers), check compatibility with the device's switching characteristics and consult a qualified electrician if unsure.