Wall switch Ospel ŁP-3R/m/33, 3-gang, 16 A, 250 V, black, IP20, 71×71×42 mm

Ospel ŁP-3R/m/33 is a 3-gang wall switch in black designed for basic on/off control of lighting and other compatible circuits. The unit is rated for 16 A at 250 V AC and offers IP20 protection. Its compact rectangular body measures 71×71×42 mm and is intended for standard flush mounting in residential and commercial environments where a simple, reliable switching solution is required.

Advantages

The switch combines a three-module configuration with screwless terminals for straightforward wiring and reduced installation time. Its 16 A rating supports typical lighting loads up to rated power, while the IP20 protection class is suitable for indoor use. The compact dimensions make it compatible with standard wall boxes and allow multiple units to be installed side by side without occupying excessive space.

Suitable for

• Controlling indoor lighting circuits in homes and apartments
• Office and commercial lighting control
• Switching small inductive or resistive loads within the rated current

Key specifications

• Number of gangs: 3 (three separate switches)
• Rated current: 16 A
• Rated voltage: 250 V AC
• Power handling at rated conditions: up to 3520 W (at 220–230 V)
• Protection class: IP20 (indoor use)
• Terminal type: screwless terminals for faster connection
• Dimensions: 71 × 71 × 42 mm (height × width × depth)
• Color: black

How to use

Install the switch into a standard flush mounting box following local electrical codes. Ensure the supply is disconnected before connecting conductors. Use the screwless terminals to insert stripped conductors and secure them according to the manufacturer's instructions. After wiring, fit the switch into the wall box and fasten it with the appropriate screws or clips. Once installed and the supply restored, operate each gang for normal on/off control of the connected circuits.

Usage recommendations

Use the switch only indoors and within its rated current and voltage. Do not expose the unit to moisture or direct water contact. For circuits with higher inrush currents or special loads (e.g., large motors, inductive devices), verify compatibility or use an appropriately rated switching device. If unsure, consult a qualified electrician for installation and load assessment.