Leave your address - as soon as the price of the product goes down, you'll know about it right away
Wall switch Ospel ŁP-3Y/m/50, anthracite, IP20, 16 A, 250 V, 71×71×40 mm
Wall switch Ospel ŁP-3Y/m/50, anthracite, IP20, 16 A, 250 V, 71×71×40 mm
In cart {{totalProductsCount}} item(s)
Your cart is empty
Wall switch Ospel ŁP-3Y/m/50, anthracite, IP20, 16 A, 250 V, 71×71×40 mm
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Wall switch Ospel ŁP-3Y/m/50, anthracite, IP20, 16 A, 250 V, 71×71×40 mm
Wall switch Ospel ŁP-3Y/m/50, anthracite, IP20, 16 A, 250 V, 71×71×40 mm
Ospel ŁP-3Y/m/50 is a compact wall-mounted switch in anthracite finish designed for standard flush installation. The switch supports alternating current up to 250 V and is rated for 16 A continuous load, making it suitable for typical lighting and small-circuit control in residential and light-commercial environments. The IP20 protection rating indicates protection against solid objects over 12 mm and is intended for indoor use. Screwless terminals simplify wiring while the 71×71×40 mm dimensions fit common mounting boxes.
The anthracite finish offers a neutral, modern appearance that integrates with various interior styles. Rated for 16 A at 250 V, the switch handles typical lighting loads and small appliance circuits. Screwless terminal connections provide faster and more reliable installation without the need for exposed screws. Compact dimensions allow installation in standard flush-mounting boxes and save wall space.
Install the switch in a standard flush-mount electrical box following local electrical codes. Ensure mains power is turned off before beginning work. Connect the live and switched live conductors to the designated screwless terminals and secure the device into the mounting box. After installation, restore power and verify correct operation by toggling the switch and confirming the controlled circuit responds as expected. The device is intended for indoor use only; do not expose to moisture or install in wet locations.
Use the switch with circuits that do not exceed the rated 16 A current and 250 V voltage. For loads close to the maximum rating, verify wiring and terminal connections periodically. Avoid exposure to water and corrosive environments; for outdoor or wet-location installations select devices with an appropriate IP rating.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}