Shutter switch Ospel AS ŁP-7G/m/84 — zwierny, green matte

Ospel AS ŁP-7G/m/84 is a zwierny (normally open) shutter switch designed for direct control of roller shutters, blinds and similar window coverings. The device offers a simple mechanical contact suitable for switching motorized shutters or sending control pulses to shutter control units. Finished in a green matte color, the switch is intended for domestic and light-commercial electrical installations where a dedicated shutter control point is required.

Advantages

The shutter switch provides a single, reliable normally-open contact for straightforward up/down control of shutter drives or control modules. Its mechanical design ensures clear tactile feedback when operated. The green matte finish integrates with interiors where a non-reflective color is preferred, and the product is built to fit standard mounting accessories used in typical European electrical installations.

Suitable for

• Control of roller shutters and external blinds in homes
• Integration with shutter control units or relay modules
• Light-commercial installations requiring a dedicated shutter control switch
• Replacement of a momentary or normally-open shutter switch in existing faceplates

When it may not be suitable

This switch provides a single normally-open mechanical contact and does not include built-in electronic timers, intermediate positions, or integrated automation features. It may not be suitable if you require a multi-function wall controller, a switch with visual indicators, or a device with built-in safety interlocks.

Key specifications

• Contact type: normally open (zwierny)
• Intended function: shutter/blind control (on/off contact)
• Finish: green matte
• Mounting: standard in-wall mounting compatible with common European faceplates
• Use environment: domestic and light-commercial electrical installations

How to use

Install the switch into a compatible in-wall mounting box and connect it according to the shutter drive or control unit wiring instructions: one terminal to the control input and the other to the common/return as required. The switch provides a mechanical closure when pressed, which will send a pulse or continuous command depending on the connected shutter system. Ensure power is isolated before wiring and verify correct operation after installation by testing upward and downward commands via the connected control circuitry.

What to consider before purchase

• Confirm compatibility with your shutter motor or control module input type (requires normally-open contact)
• Check the mechanical dimensions and mounting system to match existing faceplates
• Verify the switch does not need integrated electronics (timers, indicators, or intermediate positions)
• Ensure electrical ratings of the connected control circuitry are compatible with a mechanical contact switch

Usage recommendations

Use the Ospel AS ŁP-7G/m/84 as a dedicated control point for shutter drives or as a sending contact to a centralized shutter controller. For safe installation, switch off mains power before wiring, follow local electrical regulations, and test the operation with the connected drive. If advanced functions (timing, position memory, or automated scenes) are required, pair the switch with an appropriate controller or select a multifunction device.