Wall Switch Ospel ŁP-7YBS/m/27 — 250 V AC, 10 A, IP20, 71×71×40 mm

Ospel ŁP-7YBS/m/27 is a wall-mounted electrical switch intended for indoor lighting and simple load control in residential and commercial environments. The switch is rated for 250 V AC and a nominal current of 10 A. Its compact rectangular housing with dimensions 71×71×40 mm is designed for standard flush mounting and features IP20 protection against solid objects. The product uses screwless clamps for conductor connection, facilitating installation and replacement.

Advantages

The switch supports 250 V AC operation and a 10 A nominal current, making it suitable for typical lighting circuits and small appliances. The IP20 protection rating ensures safe indoor use where protection from finger access and solid debris is required. Screwless clamps allow quicker wiring without traditional screws, reducing installation time and the risk of loose connections. Its compact size fits standard mounting boxes and wall plates.

Suitable for

• Indoor lighting circuits in homes and apartments
• Switching basic electrical loads such as lamps and small fans
• Commercial interior spaces with standard flush-mounted wiring
• Retrofit projects where compact switch dimensions are required

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A
• Protection class: IP20 (indoor use)
• Connection type: screwless clamps for solid and stranded conductors
• Dimensions: 71 × 71 × 40 mm (width × height × depth)
• Mounting: flush wall mounting compatible with standard mounting boxes

How to use

Install the switch into a properly prepared flush mounting box following local electrical codes and with the power supply disconnected. Connect the live and switched conductors to the screwless clamp terminals according to the circuit layout, ensuring conductors are stripped to the required length and inserted fully into the clamps. After securing the device in the box and attaching the cover plate, restore power and test the switch operation by toggling the controlled load. Use the switch only for circuits within its rated voltage and current limits.

Usage recommendations

For safe and reliable operation, have installation and any modifications performed by a qualified electrician. Do not exceed the rated current of 10 A. Use the switch only in indoor dry environments consistent with IP20 protection. Periodically inspect connections for signs of wear or overheating and replace the device if mechanical damage or electrical faults are detected.