Electrical switch Ospel ŁP-1A/24 — single-pole 10 A, 250 V, brown, IP20, 82×82×36 mm

Ospel ŁP-1A/24 is a single-pole electrical switch designed for standard AC circuits with a nominal current rating of 10 A and an operating voltage up to 250 V. Its compact footprint of 82×82×36 mm and brown finish make it suitable for indoor wall-mounted installations where a simple, reliable control of lighting or basic electrical loads is required. With IP20 protection and conventional screw terminals, this model fits typical residential and light commercial environments.

Advantages

The switch offers a straightforward mechanical design that ensures consistent operation for on/off control of lamps and small appliances. Built to common electrical standards for 10 A, 250 V applications, it provides predictable performance and compatibility with widely used wiring systems. Its compact dimensions and neutral brown colour allow discreet integration into interiors while the IP20 rating and screw terminal connections support easy installation and maintenance.

Suitable for

• Wall-mounted light switches in homes, apartments and offices
• Control of basic loads such as incandescent, LED (compatible with 10 A limit), and small fans
• Replacement of existing single-pole switches in indoor spaces with IP20 protection
• Utility rooms, corridors and service areas where simple on/off control is required

Key specifications

• Configuration: single-pole (single circuit) switch
• Nominal current: 10 A
• Rated voltage: 250 V AC
• Power handling (resistive): up to about 2200 W at rated voltage
• Protection class: IP20 (indoor use, protection against solid objects ≥12.5 mm)
• Terminals: screw-type wiring terminals
• Dimensions: 82 × 82 × 36 mm
• Colour: brown

How to use

Turn off the circuit breaker before installation. Mount the switch in a compatible wall box and secure it with screws, then connect the live (phase) conductor to the common terminal and the switched conductor to the load terminal using the screw terminals. Ensure all connections are tightened to the manufacturer’s recommended torque and that the protective earth (if present in the device or installation) is handled according to local wiring rules. After installation, restore power and verify correct on/off operation of the controlled circuit.

Usage recommendations

Use this switch indoors only and do not expose it to moisture or dust beyond IP20 limits. Match the switch to loads that do not exceed the 10 A rating; for inductive or motor loads check compatibility and derating requirements. Periodically inspect connections for signs of loosening or overheating and replace the device if mechanical wear or electrical damage is observed.