Ospel touch rocker switch Sonata Touch ŁPD-2RS/M/31 double flush-mounted with backlight 10AX 230V white glass

Ospel Sonata Touch ŁPD-2RS/M/31 is a double flush-mounted touch and rocker switch designed for wall installation. Rated at 10AX and 230V, this unit combines capacitive touch sensors with conventional rocker operation to control two independent lighting circuits or loads from a single plate. The white glass front provides a flat, easy-to-clean surface and a modern aesthetic, while the integrated low-intensity backlight makes the switch easy to locate in the dark without causing glare.

Advantages

The switch integrates touch and rocker controls in one device, giving flexible operation modes for different user preferences. With a 10AX switching capacity at 230V it supports typical mains lighting loads. The glass finish resists scratches and stains and maintains a consistent look over time. The faint backlight improves usability in low-light conditions and consumes minimal standby power. The device is designed for standard flush-mounted installation and fits common wall box depths.

Suitable for

• Controlling two separate lighting circuits in residential interiors
• Use in hallways, bedrooms, living rooms and kitchens with modern decor
• Commercial spaces such as offices, small retail and service areas requiring a discreet, illuminated switch

Key specifications

• Function: double touch and rocker switch (two channels)
• Rated current: 10AX
• Rated voltage: 230 V AC
• Mounting type: flush-mounted (wall installation)
• Front material: white glass
• Integrated low-intensity backlight for location in darkness
• Control type: capacitive touch sensors combined with mechanical rocker

How to use

Install the switch in a compatible flush wall box following local electrical codes and with the power supply disconnected. Each rocker or touch area controls one circuit; press or touch the corresponding area to toggle the connected load on or off. The backlight remains active when the circuit is off to help locate the switch; it does not affect the controlled circuit and uses only a small amount of standby power. For switching inductive loads or non-standard lighting drivers, confirm compatibility with the 10AX rating.

Usage recommendations

Use with compatible wiring and protective devices; avoid exposure to excessive moisture or direct water spray. Clean the glass surface with a soft, damp cloth and mild detergent—do not use abrasive cleaners. For circuit changes, servicing or installation consult a qualified electrician to ensure safe connection and compliance with regulations.