Wall-mounted Ospel Sonata Touch ŁPD-7RS/M/32 touch roller-shutter switch 10AX 230V with backlight, black glass

Ospel Sonata Touch ŁPD-7RS/M/32 touch roller-shutter switch is a wall-mounted control unit for electric shutters and blinds. Designed for a 230V supply and a maximum switching capacity of 10AX, the module combines capacitive touch control with an integrated backlight set into a black glass finish. The unit is intended for flush mounting in standard wall boxes and provides a single, intuitive interface for raising, lowering and stopping window coverings.

Advantages

The touch surface enables smooth, contact-sensitive operation without mechanical buttons, while the 10AX rating supports typical motor loads used in residential and light commercial roller-shutter systems. The backlight improves visibility in low-light conditions and the black glass front offers a contemporary, easy-to-clean surface. The device is compatible with standard 230V installations and integrates into common wiring schemes for motorized shutters.

Suitable for

• Control of roller shutters and external blinds in homes
• Motorized window coverings in apartments and office spaces
• Retrofit projects where a modern touch control replaces mechanical switches
• Locations requiring visible control in dim environments due to the integrated backlight

Key specifications

• Rated voltage: 230 V AC
• Switching capacity: 10 AX
• Control type: Capacitive touch
• Function: Raise / Lower / Stop for roller shutters and blinds
• Front material/finish: Black glass panel
• Mounting: Flush wall mounting in standard electrical box
• Indicator: Integrated backlight for low-light visibility

How to use

Mount the switch in a standard flush wall box and connect according to the motor and mains wiring diagrams: live and neutral supply to the device and output wires to the shutter motor channels. Use brief touches to raise or lower the shutter; touch again to stop movement at any point. The capacitive surface responds to a light finger touch and the backlight assists in locating the control in dim conditions. Installation and wiring should be performed by a qualified electrician in accordance with local electrical regulations.

Usage recommendations

For reliable operation, verify that the connected shutter motor’s current does not exceed the 10AX rating. Avoid installing the unit where it will be exposed to direct water spray or extreme humidity. Clean the black glass surface with a soft, dry or slightly damp cloth; avoid abrasive cleaners or solvents that could damage the finish. When integrating into automated systems, check compatibility with any control modules or timers used in the installation.