Halogen headlight bulbs Osram H1 12V 55W P14.5s NIGHT BREAKER SILVER +100% (2 pcs)

Pair of Osram H1 12V 55W halogen headlight bulbs with P14.5s base, NIGHT BREAKER SILVER +100% (2 pcs) are designed for vehicles that use H1 fittings for low or high beam. These two bulbs deliver increased luminous intensity — up to the advertised +100% — for improved forward visibility compared with standard halogen lamps. Supplied as a set of two, the pair is intended for axle replacement, matching light output and colour temperature on both sides of the vehicle.

Advantages

The NIGHT BREAKER SILVER +100% bulbs provide significantly higher light output and a whiter light tone compared with conventional H1 lamps, while maintaining standard 12V 55W power consumption and P14.5s socket compatibility. The matched pair ensures consistent beam pattern and brightness across the axle, and the design aims to improve visibility under nighttime driving conditions without requiring modifications to the vehicle’s electrical system or headlamp housings.

Suitable for

• Replacement of worn or damaged H1 halogen bulbs in passenger cars and light commercial vehicles
• Upgrading standard H1 bulbs to higher luminous intensity for improved night driving visibility
• Axle pairs when both left and right headlight bulbs require replacement to ensure balanced illumination

Key specifications

• Bulb type: H1 halogen
• Voltage: 12 V
• Power: 55 W
• Socket/base: P14.5s
• Light output: up to +100% luminous intensity vs. standard reference
• Colour tone: whiter light compared with standard halogen (visual appearance)
• Contents: two identical bulbs for axle replacement

How to use

Switch off the vehicle ignition and allow the existing bulb and headlamp area to cool before handling. Remove the headlamp cover or bulb access cap according to the vehicle manufacturer’s instructions, disconnect the electrical connector, and extract the old H1 bulb from the P14.5s socket. Install the new Osram H1 NIGHT BREAKER SILVER bulb by inserting it into the P14.5s base, ensuring correct seating and secure electrical connection. Refit any covers and test the headlight operation on low and high beam to confirm correct alignment and functionality. Avoid touching the glass envelope with bare fingers; use gloves or a clean cloth to prevent oil deposits that can shorten bulb life.

Usage recommendations

Replace bulbs in matched pairs to maintain even beam pattern and brightness across the axle. Check headlight alignment after installation and adjust if necessary to comply with local regulations. Dispose of used halogen bulbs according to local waste handling guidelines.