Corrugated automotive tube PAWBOL G.6157P, 100 m roll, 7/10 mm, black

PAWBOL G.6157P corrugated automotive tube supplied as a 100 m roll, with nominal internal/outer diameters 7/10 mm in black. This flexible corrugated conduit is intended for protection and routing of electrical wiring and cables in automotive and vehicle installations. Its corrugated construction provides bending ability for routing through constrained spaces while offering a barrier against abrasion, moisture and mechanical contact from surrounding components.

Advantages

The corrugated design combines flexibility and structural strength to resist crushing and kinking during installation. Supplied on a 100 m roll for continuous runs and minimised joins, the tube is suitable for long harnesses or multiple branch runs. The material surface reduces friction against wires for easier pulling and provides basic resistance to oils and light fluids commonly found in vehicle compartments.

Suitable for

• Protecting and routing low-voltage wiring in cars, vans and trucks
• Harnessing cable runs in engine bays, underdash areas and trunks
• Covering new wiring in retrofit or repair work
• Organising multiple cables into a single protective conduit

Key specifications

• Roll length: 100 m
• Nominal internal diameter: 7 mm
• Nominal outer diameter: 10 mm
• Color: black
• Construction: corrugated flexible tube for mechanical protection

How to use

Measure the required length and cut the corrugated tube with a sharp blade or scissors to obtain clean edges. Insert wiring by pushing or using a fish tape/pulling tool for longer harnesses. Route the tube along the planned path and secure it at intervals with appropriate clamps, zip ties or adhesive mounts to prevent movement. Avoid sharp bends with radii smaller than the tube’s flexibility limits to prevent compression of the internal space.

Usage recommendations

For best results, combine the corrugated tube with suitable grommets or cable glands where it passes through metal panels to prevent chafing. Inspect and replace any sections showing severe abrasion or cracking; when installing near heat sources, maintain clearance from hot exhaust components or use heat shields if necessary.