TV wall mount Peerless MOD-FPSKIT150-B for 32"–60" screens, VESA 700x400, tilt -5° to 20°, max load 119.7 kg, black

Peerless MOD-FPSKIT150-B is a pre-assembled ceiling mount kit designed for a single flat-panel display sized 32" to 60" (81.3–152.4 cm). The kit includes a cathedral ceiling plate that can be angled to accommodate vaulted or sloping ceilings, a 5' (1.5 m) black extension pole, a single display flat panel mount and a large universal adapter. The universal adapter supports VESA mounting patterns up to 700 x 400 mm and the system supports secure installation of a single display at heights up to 1.5 m from the ceiling.

Advantages

The kit provides a ready-to-install assembly that reduces on-site preparation, with a cathedral ceiling plate that allows up to ±60° tilt for use on angled ceilings. Its large universal adapter fits a wide range of displays from 32" to 60", while the steel construction and a maximum load capacity of 119.7 kg ensure stable support for heavier flat-panel TVs. The pole permits versatile vertical positioning of the display along the full 2" (50 mm) diameter with the MOD-ASL accessory.

Suitable for

• Mounting a single 32"–60" flat-panel TV in homes, offices or public spaces
• Installations on vaulted or sloping ceilings requiring an adjustable cathedral plate
• Large displays that require a high load capacity and wide VESA compatibility

When it may not be suitable

This kit is intended for mounting one display only; it is not suitable for multi-screen arrays or video walls. It requires displays with VESA patterns within the supported 700 x 400 mm range and may not fit screens with non-standard mounting interfaces or VESA dimensions outside that range.

Key specifications

• Supported screen size: 81.3 cm (32") to 152.4 cm (60")
• VESA compatibility: up to 700 x 400 mm
• Tilt range: -5° to 20° (mount tilt); cathedral plate angle up to ±60° for sloped ceilings
• Maximum load capacity: 119.7 kg
• Number of displays supported: 1
• Extension pole length: 1.5 m (5')
• Pole diameter: 2" (50 mm)
• Finish: black

How to use

Position and fix the cathedral ceiling plate to the structural ceiling surface, adjusting its angle as needed for vaulted or sloping ceilings. Attach the 1.5 m extension pole to the plate, mount the universal adapter to the display using the appropriate VESA holes, then lift and secure the display onto the flat panel mount. Adjust the display tilt between -5° and 20° for optimal viewing. Use the MOD-ASL accessory to change the vertical position of the display along the pole if required.

What to consider before purchase

• Confirm your display's VESA mounting pattern is within 700 x 400 mm
• Ensure the display size is between 32" and 60" and the weight does not exceed 119.7 kg
• Verify the ceiling structure can support the mount and the combined weight of pole and display
• Check whether single-display mounting meets your installation needs (not suitable for multi-screen setups)

Usage recommendations

For safe and reliable installation, mount the cathedral plate to structural ceiling members or use appropriate anchors rated for the combined load; follow manufacturer instructions for torque settings and secure cable routing to prevent strain on the display mount.