-
Weight:
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
-
0.1 kg
-
Certification:
-
CE
-
Operating relative humidity (H-H):
-
10 - 85
-
Storage temperature (T-T):
The minimum and maximum temperatures at which the product can be safely stored.
-
-40 - 85
-
Operating temperature (T-T):
The minimum and maximum temperatures at which the product can be safely operated.
-
0 - 50
-
Storage relative humidity (H-H):
-
5 - 95
-
Height:
The measurement of the product from head to foot or from base to top.
-
24 mm
-
LED indicators:
-
Yes
-
Width:
The measurement or extent of something from side to side.
-
80 mm
-
Depth:
The distance from the front to the back of something.
-
75 mm
-
Product colour:
The colour e.g. red, blue, green, black, white.
-
White
-
Networking standards:
The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
-
IEEE 802.3x, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3
-
Downstream data rate:
-
2.5 Mbit/s
-
Upstream data rate:
-
1.25 Mbit/s
-
Ethernet LAN (RJ-45) ports:
Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
-
1
-
MAC address filtering:
Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.
-
Yes
-
Wi-Fi:
Popular technology that allows an electronic device to exchange data or connect to the internet wirelessly using radio waves.
-
No
-
Reset button:
-
Yes
-
Fiber ports quantity:
The number of sockets (ports) for fibers (cables).
-
1
-
On/off switch:
The button which is pressed to switch the device on or off.
-
Yes
-
Fiber optic connector:
This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
-
SC, LC (UPC)
-
RX sensitivity:
-
-28 dB
-
Product type:
The sub-category of the product.
-
Optical network terminal (ONT)
-
MAC address learning:
-
Yes
