Power extension lead Plastrol W-98189 3 m, 4 sockets, 3-pole, 10 A, black, with switch

Plastrol W-98189 power extension lead provides four mains sockets on a 3 m black cable with a built-in on/off switch. Designed for general household and light office use, this 3-pole extension lead is rated for 10 A and allows you to extend a single wall outlet into multiple convenient points for lamps, chargers, small appliances and electronic devices where the 10 A rating is sufficient.

Advantages

The extension lead combines a compact, low-profile housing with a 3 m cable length to place outlets where they are needed without crowding the wall socket. The built-in switch enables quick power control for all connected devices at once, and the 3-pole design supports grounded connections for devices that require an earth. The unit’s 10 A rating is suitable for typical lighting, phone and laptop chargers, and other low-power appliances used in home and small-office environments.

Suitable for

• Connecting table lamps and floor lamps
• Powering phone, tablet and laptop chargers
• Supplying small kitchen appliances with low current draw (within 10 A limit)
• Extending outlets under desks or in meeting rooms for office equipment
• Temporary power distribution for consumer electronics and small devices

Key specifications

• Cable length: 3 m
• Number of sockets: 4
• Poles: 3‑pole (live, neutral, earth)
• Rated current: 10 A
• Colour: black
• Built-in on/off switch for group control

How to use

Plug the extension lead into a compatible mains outlet and place the 3 m cable to reach the desired location for additional sockets. Insert devices into the extension’s sockets, observing the total current draw so it does not exceed the 10 A rating. Use the built-in switch to power all connected devices on or off together. Ensure plugs are fully inserted and that the extension lead is used on a flat, dry surface away from heat sources and water.

Usage recommendations

Do not connect high-power appliances that require more than 10 A or devices with significant start-up currents such as ovens, large heaters, water boilers or air conditioners. Periodically inspect the cable and housing for damage; disconnect and replace the unit if any damage is found. For permanent or heavy-duty installations consult a qualified electrician and use an extension solution rated for the required load.