PLA Matte 3D Printing Filament 1.75 mm 1 kg — Polmask Pastel Watermelon

Polmask PLA Matte filament in Pastel Watermelon is a 1.75 mm, 1 kg spool of polylactic acid formulated to deliver a subdued, low-sheen surface for FDM/FFF 3D printing. Designed for compatibility with most printers that accept 1.75 mm filament, this PLA offers reliable feeding, predictable layer adhesion and an aesthetic matte finish that reduces visible reflections and highlights surface details on prototypes, decorative parts and scale models. The material is a bioplastic-based filament that prints with typical PLA processing temperatures and requires standard printer settings with attention to dry storage to preserve print performance.

Advantages

The matte formulation produces a soft, non-gloss appearance that minimizes surface glare and highlights fine textures. Polmask PLA Matte exhibits good dimensional stability and prints with consistent extrusion for layered accuracy. The Pastel Watermelon color provides an even, muted tone suitable for visible parts without requiring post-processing to dull glossy surfaces. The 1 kg spool size balances run length with storage convenience for hobbyists and small workshops.

Suitable for

• Prototypes and functional concept models where a non-reflective surface is preferred
• Decorative items, figurines and display pieces with visible surface detail
• Scale models and architectural mock-ups requiring subdued color
• Hobby prints and parts for painting or finishing

Key specifications

• Filament material: Polylactic acid (PLA) with matte formulation
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg gross filament weight
• Surface finish: Matte / low gloss
• Color: Pastel Watermelon (muted pink/green tone)
• Compatibility: Standard FDM/FFF 3D printers accepting 1.75 mm filament

How to use

Load the 1.75 mm Polmask PLA Matte filament into a compatible FDM/FFF printer following the manufacturer’s filament loading procedure. Recommended print temperatures are within the typical PLA range; adjust nozzle and bed temperatures according to your printer, hotend and part requirements. Use moderate print speeds and tune retraction settings to reduce stringing for the matte material. Ensure good bed adhesion with an appropriate build surface or adhesion aid and verify first-layer settings before starting a full print. After printing, allow parts to cool before removal to reduce warping or deformation.

Usage recommendations

Store the spool in a dry environment and use desiccant to maintain filament dryness. If moisture absorption occurs, consider a controlled filament drying procedure before printing. For best surface quality, calibrate extrusion multiplier and layer height to match the matte finish characteristics; minimal sanding is usually sufficient for final appearance when required.