Battery Lithium Iron Phosphate power plant NV822447 24V 100Ah

Battery Lithium Iron Phosphate LiFePO4 25.6V, 100Ah, 2560Wh (power plant NV822447) is a sealed LiFePO4 energy storage unit designed for stationary and mobile backup applications. With a nominal voltage of 25.6V (market name 24V) and 100Ah capacity, it provides 2560Wh usable energy and is intended for UPS, telecom, solar and other backup systems where long cycle life, stable voltage and low self-discharge are required.

Advantages

This LiFePO4 battery delivers high energy efficiency (up to 94%), fast charging and a wide operating temperature range. It is fully sealed and can be mounted in any orientation. Compared with lead‑acid batteries it offers much longer service life (up to 25 times more cycles), lower weight, higher discharge current capability and a very low self‑discharge rate. Built‑in smart BMS provides over‑discharge, short circuit, voltage, current and temperature monitoring as well as overload and overheating protection. The battery is non‑flammable and non‑toxic.

Suitable for

• Uninterruptible power supplies (UPS) and backup systems
• Solar and wind energy storage
• Telecom equipment and emergency power
• Caravans, boats and mobile power applications
• Street lighting, lifts, power tools and appliances

Key specifications

• Capacity: 100 Ah (2560 Wh)
• Battery chemistry: LiFePO4 (lithium iron phosphate)
• Nominal voltage: 25.6 V (market 24 V)
• Max. charging voltage: 29.2 V
• Cut‑off voltage: 20 V
• Standard charging current: 20–50 A
• Max. continuous discharge current: 50 A
• Max. discharge current (5 s): 100 A
• Protection class: IP44
• Material: ABS + PC
• Operating temperature: -20 °C to 60 °C
• Storage temperature: -20 °C to 35 °C
• Dimensions: 520 x 240 x 220 mm
• Weight: 22.3 kg
• Color: Black
• Warranty: 24 months

How to use

Install the battery in a dry, ventilated location and secure it according to the device manufacturer’s instructions. Connect charge and load leads respecting polarity and recommended cable sizes for the specified currents. Charge within the specified voltage range (maximum charging voltage 29.2 V) and use a compatible charger or charge controller for LiFePO4 chemistry. Observe the BMS indicators and integration requirements when connecting to inverters, UPS units or solar charge controllers.

Usage recommendations

For long service life, avoid deep discharge below the cut‑off voltage (20 V) and store the battery at moderate temperature. Use a charger or controller designed for LiFePO4 batteries, follow recommended charge currents (20–50 A) and ensure adequate ventilation if operating near the upper temperature limit.