Disc sander POWERPLUS POWX0479 — 22.5 cm disc, 600–2600 RPM, 220–240 V

POWERPLUS POWX0479 is a portable disc sander with a 22.5 cm sanding disc and a hook-and-loop (Velcro) fixing system for sanding media. It is powered from a 220–240 V AC supply at 50 Hz and offers an adjustable idle speed range of 600–2600 RPM. Designed for sanding and finishing wood, drywall and similar materials, the tool combines a compact handheld form factor with features to reduce dust and improve visibility during work.

Advantages

The sander provides variable speed control between 600 and 2600 RPM, allowing adaptation to different materials and surface conditions. A soft-start motor reduces abrupt starts for safer handling, while an integrated LED ring illuminates the working area for more accurate sanding. Dust extraction is possible via a flexible hose connection to a vacuum cleaner or the supplied dust bag, helping to minimise airborne dust. The hook-and-loop system enables quick replacement of sanding discs and the support foot protects the extraction hose when the tool is placed on the floor.

Suitable for

• Sanding and finishing wood surfaces
• Sanding drywall, ceilings and walls
• Removing paint, adhesive residues and loose plaster
• Detail sanding where adjustable speed and LED illumination are useful

Key specifications

• Disc diameter: 22.5 cm
• Rated voltage: 220–240 V AC, 50 Hz
• Idle speed range: 600–2600 RPM (adjustable)
• Power rating (nominal motor power): 1050 W
• Noise: sound power level 104 dB; sound pressure level 93 dB
• Dust extraction: flexible hose connection (4 m hose supplied) and dust bag compatibility
• Illumination: integrated LED ring
• Sanding disc attachment: hook-and-loop (Velcro)
• Portable design with extendable tube (up to 165 cm) and foldable storage

How to use

Connect the sander to a 220–240 V AC outlet and adjust the speed to match the workpiece and sanding abrasive. Fit the sanding disc onto the 22.5 cm pad using the hook-and-loop system. For drywall or ceiling work, extend the tube to the required length (up to 165 cm) and connect the extraction hose to a vacuum cleaner or the dust bag to reduce dust. Switch on the LED ring if additional illumination is needed. Apply steady, even pressure while moving the disc across the surface; avoid excessive force to prevent gouging or uneven sanding. After use, switch off the machine and allow the disc to stop before setting the tool down on its support foot.

Usage recommendations

Use sanding media appropriate for the material and desired finish; start with coarser grit for material removal and progress to finer grit for finishing. Operate the tool at lower speeds for delicate surfaces and higher speeds for aggressive stock removal. Always wear suitable personal protection against dust and noise, and ensure dust extraction is connected for indoor use to maintain air quality.