Leave your address - as soon as the price of the product goes down, you'll know about it right away
HDMI repeater PREMIUMCORD khrep03 — signal extender for HDMI up to 40 m
HDMI repeater PREMIUMCORD khrep03 — signal extender for HDMI up to 40 m
In cart {{totalProductsCount}} item(s)
Your cart is empty
HDMI repeater PREMIUMCORD khrep03 — signal extender for HDMI up to 40 m
Leave your address - as soon as the price of the product goes down, you'll know about it right away
HDMI repeater PREMIUMCORD khrep03 — signal extender for HDMI up to 40 m
HDMI repeater PREMIUMCORD khrep03 — signal extender for HDMI up to 40 m
PREMIUMCORD khrep03 is an HDMI repeater designed to extend HDMI signal transmission up to 40 m. The inline device is placed between two HDMI cables (for example between two 20 m cables) and features female-to-female connectors. It regenerates and boosts weak or degraded HDMI signals to restore stable video and audio over long cable runs and supports digital processing for accurate colour reproduction.
The repeater supports resolutions including 480i, 480p, 720i, 720p, 1080i, 1080p and 4Kx2K, and is compatible with common PC modes such as VGA, SVGA, XGA, SXGA and UXGA. It does not require an external power supply in most setups because it is powered via the HDMI bus; if the HDMI source does not provide sufficient current, a 5 V micro-USB supply can be used. Recommended cable specification for reliable operation is a 20 m HDMI cable with 24 AWG copper conductors.
Install the repeater inline between two HDMI cables where the signal weakens (for example between two 20 m cables). Ensure both cable ends are firmly connected to the female ports of the repeater. If the connected HDMI source does not supply sufficient power to the repeater, connect a 5 V micro-USB power supply to the device; this can be provided from a USB port using a micro-USB cable or from a 230 V USB charger. Use HDMI cables with the recommended conductor thickness for best results.
For reliable long-distance transmission, use high-quality HDMI cables with 24 AWG copper conductors and test the setup without and with micro-USB power if the image is unstable. Place the repeater in the middle of the cable run (e.g., between two 20 m cables) to maximize signal regeneration.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}