Power strip PREMIUMCORD Acar S8 with 3 m cable, 8 outlets, surge protection, white

PREMIUMCORD Acar S8 is a white mains extension with eight grounded outlets and a 3 m cable, offering integrated surge protection for connected electronics. The unit includes a circuit breaker that protects both phase and neutral conductors against overload and overvoltage, and an indicator that shows presence of mains voltage. The device must be connected only to sockets with a protective earth pin.

Advantages

The power strip provides combined overload and surge protection via a 10 A circuit breaker and built‑in surge suppression components. It features fast response time (<25 ns), low leakage current (<0.5 mA) and a flame‑retardant plastic housing. Compact dimensions (445 × 54 × 52 mm) and an integrated power indicator make it suitable for organized installations.

Suitable for

• Home and office workstations
• PCs and peripherals (monitors, printers, routers)
• Entertainment centers and audiovisual equipment
• Small household appliances requiring surge protection

Key specifications

• Brand: PREMIUMCORD, Model: Acar S8 (ppacars8-3)
• Color: white; Cable length: 3 m
• Outlets: 8 grounded sockets
• Rated voltage/frequency: 230 V / 50 Hz; Rated current: 10 A
• Circuit breaker: 10 A / 250 V
• Leakage current: <0.5 mA
• System: 2P+Z (phase, neutral, earth)
• Response time (delay): <25 ns
• Protection level Up: <= 1.3 kV (L/N)
• Nominal discharge current: 2 kA (8/20 µs)
• Maximum impulse current iMAX: 6.5 kA
• Energy absorption: 150 J
• Material: flame‑retardant plastic
• Dimensions: 445 × 54 × 52 mm
• EAN: 5904743365615

How to use

Plug the power strip into a properly earthed mains socket and connect your devices to the grounded outlets. Ensure the socket provides protective earth; the device must not be used with non‑earthed outlets. Do not exceed the rated current of 10 A for total connected load. Observe the integrated indicator to verify mains presence. If the circuit breaker trips, disconnect devices, identify the cause of overload, reset the breaker before reuse.

Usage recommendations

Use the PREMIUMCORD Acar S8 to protect sensitive electronics from voltage spikes while keeping the total connected load within the 10 A rating. Do not use in damp environments or outdoors; avoid daisy‑chaining multiple extension leads. For installations requiring higher surge performance or continuous heavy loads, consider a dedicated surge protection device or professional electrical assessment.