Hole saw Proline 26400, diameter 6.4 cm, 1 piece

Proline 26400 is a single-piece hole saw with a 6.4 cm (64 mm) cutting diameter, designed to create circular openings in materials such as gypsumboard, plywood, wood and plastic panels. The tool is intended for use with compatible drill drivers and arbor adapters and is suitable for DIY and light professional installation tasks where a compact, easy-to-mount hole saw is required.

Advantages

The hole saw offers a precise 64 mm cutting diameter and compact single-piece construction that simplifies mounting and handling. Its design enables reliable cutting in common building materials including gypsumboard and various woods, while the single-unit format reduces setup time. The saw is compatible with standard drill drivers and arbor adapters, providing practical flexibility for different job sites and tasks.

Suitable for

• Cutting circular openings in gypsumboard for electrical boxes and fixtures
• Making holes in plywood and wooden panels for pipes or cable routing
• Drilling through plastic panels and lightweight composite materials
• DIY installations and light professional fit-out work

Key specifications

• Cutting diameter: 64 mm
• Unit: single-piece hole saw (1 piece)
• Recommended materials: gypsumboard, plywood, wood, plastic panels
• Compatibility: intended for use with drill drivers and arbor adapters
• Application area: interior installations and light construction tasks

How to use

Install the hole saw onto a compatible arbor or adapter and secure it to the drill driver per the arbor manufacturer’s instructions. Mark the centre of the required opening and position the pilot point (if present) to stabilise the saw. Start drilling at low speed to establish the cut, then increase speed steadily while applying moderate, even pressure. Remove cut material and clear debris periodically to maintain cutting efficiency. After cutting, deburr the edge of the opening as needed for a clean finish.

Usage recommendations

Use suitable personal protective equipment such as eye protection and gloves. For thin or fragile materials, support the workpiece from behind to reduce splintering. Select an arbor and pilot bit appropriate for the drill and material, and avoid excessive side load on the hole saw to prolong its service life.