Polishing Foam Pad Proline PROBUILDER Ø150×50 mm for rotary and dual-action polishers

Polishing foam pad Proline PROBUILDER Ø150×50 mm is a round foam bonnet designed for use with rotary and dual-action polishers. Compatible with standard backing plates, the pad provides consistent surface contact to support paint correction, finishing and waxing steps on automotive paint, gelcoat and other coated surfaces. Its 150 mm diameter and 50 mm thickness offer a balance between coverage and control for medium to large panels.

Advantages

The Proline PROBUILDER foam pad is constructed to maintain shape and thickness during typical polishing operations, delivering uniform product distribution and predictable cutting or finishing action depending on the polishing compound used. The pad's density and profile help reduce heat buildup and promote even contact across the panel, which supports consistent results and reduces the need for repeated passes. It mounts easily to standard backing plates compatible with rotary and dual-action tools.

Suitable for

• Paint correction and scratch reduction on automotive panels
• Final finishing and gloss enhancement after compounding
• Applying and removing waxes, glazes or sealants
• Polishing gelcoat on boats and other composite surfaces
• Working on medium to large flat or gently curved surfaces

Key specifications

• Shape: round
• Diameter: 150 mm
• Thickness/height: 50 mm
• Compatible tools: rotary and dual-action polishers
• Attachment: mounts to standard backing plates
• Intended uses: cutting, finishing and waxing depending on compound
• Suitable surfaces: automotive paint, gelcoat, other coated surfaces

How to use

Attach the polishing foam pad securely to a compatible backing plate before operating the polisher. Start with the tool at low speed to seat the pad and apply a small, even amount of chosen polishing compound to the pad or workpiece. Use overlapping passes and controlled pressure, gradually increasing speed as appropriate for the compound and task. Monitor pad and paint temperature during use; allow the pad to cool and clean or change pads when saturated with product or contaminated.

Usage recommendations

For best results, select the polishing compound that matches the desired level of abrasion: heavier-cut compounds for paint correction and lighter finishing compounds or waxes for gloss and protection. Clean the pad after each session by removing residue and allowing it to dry fully before storage. Replace the pad when it loses shape, becomes torn, or no longer delivers consistent performance.