DMX cable PSSO 3-pin IP65 15 m black – model 30227841

PSSO DMX cable 3-pin IP65, 15 m in black is a dedicated signal cable for transmitting DMX512 control data between lighting controllers, dimmers and fixtures. Its IP65-rated connectors and jacket provide protection against dust and water jets, making the cable suitable for temporary outdoor events and indoor installations where moisture or dust may be present. The 15 metre length gives flexibility for stage setups and longer runs without intermediate joins.

Advantages

The cable combines a standard 3-pin DMX wiring configuration with a weather-resistant construction to maintain signal integrity in damp or dusty conditions. Robust outer insulation and sealed connectors reduce the risk of accidental disconnection and protect contacts from corrosion. The black colour and flexible jacket make routing and concealment easier in theatre and event environments while preserving consistent control signal transmission.

Suitable for

• Connecting lighting consoles, dimmer packs and DMX fixtures in live event setups
• Outdoor stage installations and festivals where weather resistance is required
• Permanent or temporary installations in damp or dusty indoor environments
• Longer cable runs up to 15 m without additional extensions

When it may not be suitable

This 3-pin DMX cable is intended for standard DMX512 control signals and may not be suitable where five-pin DMX wiring is required by certain professional fixtures or where proprietary connectors are specified. It is not a power cable and is not designed to carry mains voltage.

Key specifications

• Cable type: DMX control cable, 3-pin configuration
• Length: 15 m
• Ingress protection: IP65 (connectors and jacket rated against dust and water jets)
• Colour: Black
• Jacket: Flexible, weather-resistant outer insulation

How to use

Connect the cable between the DMX output of your lighting console or controller and the DMX input of the first fixture, dimmer or splitter. Ensure connectors are fully seated and any sealing rings or threaded collars are tightened to maintain the IP65 protection. For longer chains, daisy-chain devices using the DMX output from one fixture to the next, and terminate the last device with an appropriate DMX terminator if required by your setup. Inspect the cable and connectors regularly for damage or wear, especially after outdoor use.

What to consider before purchase

• Verify whether your lighting equipment requires 3-pin or 5-pin DMX connectors
• Confirm that 15 m length fits your routing and distance needs without additional joins
• Check compatibility of connector type and mechanical sealing with your fixtures and racks

Usage recommendations

Use this PSSO 3-pin IP65 DMX cable for outdoor or damp-environment signal runs, keep connector threads clean and tightened to preserve ingress protection, and use a proper DMX terminator at the end of the chain to minimise signal reflections.