PSSO Speaker Cable Speakon 4×2.5 mm², 3 m, black (3022792R)

PSSO Speaker Cable Speakon 4×2.5 mm², 3 m in black is a four-conductor audio cable designed for professional loudspeaker-to-amplifier connections. With each conductor sized at 2.5 mm² and terminated for use with Speakon connectors, the cable provides a low-resistance path suitable for PA systems, stage rigs and studio monitoring setups that require secure, multi-channel speaker wiring over a short run.

Advantages

The cable’s four 2.5 mm² conductors allow for bi-amping or parallel wiring of speaker configurations while maintaining sufficient current carrying capacity for typical live sound and installed audio applications. The 3 m length balances flexibility and convenience for common stage and studio layouts. Black outer sheathing offers a neutral, unobtrusive appearance and basic protection against abrasion in normal use.

Suitable for

• Connecting powered amplifiers to passive loudspeakers in PA systems
• Bi-amping or bridged speaker configurations requiring separate conductors
• Short to medium runs in live sound, rehearsal rooms, and studio setups
• Stage and installation applications where Speakon terminations are standard

When it may not be suitable

This 3 m cable is intended for short to medium distance connections; it may not be appropriate for long cable runs where voltage drop and signal loss become significant. It is also not a microphone or instrument cable and does not include shielding intended for low-level balanced audio lines.

Key specifications

• Number of conductors: 4
• Conductor cross-section: 2.5 mm² per conductor
• Length: 3 m
• Color: black
• Intended connector type: Speakon-compatible terminations
• Typical use: speaker-level audio connections

How to use

Strip the outer jacket and individual conductor insulation according to the Speakon connector manufacturer's recommendations, then terminate each conductor securely in the appropriate Speakon contacts for the required wiring scheme (single-channel, bi-amp, or parallel). Route the cable to avoid tight bends, excessive tension, and contact with sharp edges. For permanent installations, secure the cable with suitable clamps and avoid sharp kinks that could damage conductors.

What to consider before purchase

• Verify the need for a 3 m length versus longer runs to avoid insufficient reach.
• Confirm that Speakon connectors are used on your amplifier and speaker equipment.
• Check whether 2.5 mm² conductor size meets current and impedance requirements for your speaker setup.

Usage recommendations

Use this cable for direct speaker-to-amplifier connections in live and installed audio where secure Speakon connections are preferred; for longer runs or low-level audio signals, select appropriately rated cable types and lengths.