Quer angled DC power plug 5.5×2.5 mm (18.5V/3.8A) with cable for Rebel – KOM0262

Angled DC power plug from Quer designed for Rebel devices, with a 5.5×2.5 mm barrel connector and rated for 18.5 V at 3.8 A. This inline cable end provides a right-angled mating interface that is centre‑positive and intended for mains-adapter to device connections. It is suitable for replacing a damaged connector on an existing power cable or for building a custom replacement lead for compatible electronics that require a 5.5×2.5 mm DC input and the specified voltage and current.

Advantages

The angled design reduces strain at the cable exit and helps maintain a low profile when the connector is inserted into the device. The connector housing and barrel dimensions follow the common 5.5×2.5 mm standard for reliable mechanical fit, and the 18.5 V / 3.8 A rating supports stable power delivery for equipment specified within that range. As an inline cable end, it allows quick replacement without changing the mains adapter and can be used in repair or DIY cable assembly.

Suitable for

• Replacing a worn or damaged DC barrel plug on a compatible Rebel device or similar equipment
• Creating a custom replacement power cable for laptops and electronics that accept a centre‑positive 5.5×2.5 mm input
• Repair workshops and technicians performing field or bench repairs
• Applications where a right‑angled connection reduces cable stress or saves space behind the device

Key specifications

• Connector type: 5.5 × 2.5 mm barrel, centre‑positive
• Orientation: right‑angled (angled) plug
• Rated voltage: 18.5 V DC
• Rated current: 3.8 A
• Mounting: inline cable end for soldering or splicing into an existing cable
• Compatibility: designed for Rebel series devices and other equipment requiring a 5.5×2.5 mm DC input at the given rating

How to use

Ensure the device to be powered requires a centre‑positive 5.5×2.5 mm connector and accepts 18.5 V / 3.8 A. If replacing a damaged plug, cut the old connector from the cable, strip the cable conductors, and solder or crimp the wires to the corresponding terminals of the inline plug, observing polarity. For DIY assembly, secure connections with heat shrink or insulating tape and test the polarity and voltage before connecting to the device. Insert the angled plug fully into the device inlet to ensure mechanical and electrical contact.

Usage recommendations

Verify device voltage and polarity before installation to avoid damage. Make secure, insulated connections and avoid excessive bending near the cable termination; the right‑angled housing helps but proper strain relief or cable routing is recommended for long‑term reliability.