This is due to long delivery times and limited product warranties.
Save time and money with our discounts!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Disk Array Icy Dock MB324SP-B
The Disk Array Icy Dock MB324SP-B is a 5.25” bay enclosure that converts a single optical bay into four hot-swappable 2.5” drive bays, supporting SATA III 6Gb/s and single-channel SAS (SAS host required). It accepts 2.5” HDDs or SSDs with heights of 7mm, 9.5mm and 12.5mm, uses a single 15‑pin SATA power connector to power all four drives, and features a built-in 40mm cooling fan with adjustable speed settings. The compact steel chassis and tool-less ExpressTray system simplify drive installation and service while retaining optional screw mounting points for added stability.
The MB324SP-B provides high-density storage in a single 5.25” bay, enabling four 2.5” drives with hot-swap capability and single-channel SAS compatibility. Tool-less ExpressTray installation reduces service time and effort, while the active power technology powers the enclosure only when a drive is present to save energy. The enclosure includes per-bay activity LEDs, a 40mm upgradable cooling fan with HIGH/LOW/AUTO settings, and locking latch support for secure cable connections.
Install the MB324SP-B into a standard 5.25” bay in your desktop chassis and connect a 15‑pin SATA power cable and the appropriate SATA or SAS data connections (SAS controller required for SAS operation). Insert drives into the ExpressTray by placing the front end into the built-in pins, pressing the rear with the connectors into place, and sliding the tray into the bay until it latches. To remove a drive, pull the rear tab of the tray to release the latch and slide the tray out. Adjust the fan speed jumper to HIGH, LOW or AUTO according to cooling needs, and replace the stock fan with a standard 40mm 2‑pin or 3‑pin fan if desired.
For optimal results, use the MB324SP-B with drives that match the supported heights (7mm–12.5mm) and ensure proper airflow in your chassis. Enable AUTO fan mode for temperature-based cooling during mixed workloads, and secure SATA/SAS cables with locking-latch compatible cables if stable connections are required.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}