RAISE3D SPRA-1013 Hyper Speed Natural ABS 3D Printer Filament - Natural, 1 unit

RAISE3D SPRA-1013 Hyper Speed Natural ABS is a natural-coloured ABS filament supplied as a single spool intended for FDM/FFF 3D printing. Formulated for steady extrusion and reliable layer adhesion, this ABS filament is suitable for producing prototypes, functional parts and mechanical components that benefit from ABS material properties such as impact resistance and dimensional stability. It is designed for compatibility with Raise3D printers and other systems that accept ABS-grade polymers.

Advantages

This natural ABS filament offers consistent diameter and melt behaviour to reduce printing issues and ensure repeatable results across multiple parts. Its formulation balances good interlayer adhesion and toughness, supporting functional testing and parts that require moderate mechanical strength. The neutral natural colour makes it convenient for post-processing, painting or finishing, while the single-spool supply is straightforward to load and manage in standard filament holders.

Suitable for

• Rapid prototyping of enclosures, clips and housings
• Functional mechanical parts subject to moderate stress
• Parts requiring machining, sanding or painting after printing
• Use in Raise3D systems and other printers compatible with ABS

When it may not be suitable

ABS is sensitive to moisture and may require drying before use if stored in humid conditions; prolonged exposure to moisture can affect surface finish and extrusion quality. Thin-walled models or very large flat prints may warp without a heated build chamber or appropriate bed adhesion measures, so ABS may not be ideal for very large, flat, unsupported prints on printers without an enclosed heated volume.

Key specifications

• Material: ABS (Acrylonitrile Butadiene Styrene)
• Colour: Natural (off-white/translucent)
• Format: Single spool filament
• Compatibility: Designed for FDM/FFF printers supporting ABS
• Typical applications: Prototyping, functional parts, mechanical components

How to use

Load the filament spool onto your printer’s filament holder and feed the filament into the extruder according to your printer manufacturer’s instructions. Set printing parameters suitable for ABS: use an extruder temperature and heated bed temperature recommended by your printer or material guidelines, enable a heated or enclosed build chamber if available, and select appropriate print speeds for reliable extrusion. Ensure the filament is dry before printing; if necessary, dry the spool at a low temperature in a filament dryer or oven following ABS drying recommendations. After printing, allow parts to cool gradually to reduce warping and remove prints using standard tools.

What to consider before purchase

• Verify your printer supports ABS and has appropriate extruder/bed temperature ranges
• Plan for drying and storage to prevent moisture uptake (use sealed containers or desiccants)
• Consider enclosure or heated chamber availability to minimise warping on larger prints
• Confirm spool size and filament diameter match your printer’s requirements

Usage recommendations

For best results with RAISE3D Hyper Speed Natural ABS, print with a heated bed, consider an enclosure to maintain ambient temperature, and use brim or raft on parts prone to edge lift. Store opened spools in airtight bags with desiccant to keep filament dry and maintain consistent extrusion quality.