Brad nail Rapid Tools No. 32, galvanized metal, 50 mm, 1000 pcs

Rapid Tools No. 32 brad nails are 50 mm long, made from galvanized metal and supplied in a pack of 1000 pieces. They are designed for use with brad nailers that accept 32/34° strip nails with a D-head. The galvanized finish provides corrosion resistance while the resin coating improves holding power in wood and helps reduce jamming during driving.

Advantages

These brads combine a corrosion-resistant galvanized surface with a resin coating to improve fixation in timber. Precision chisel-cut legs are engineered for consistent penetration and reduced splitting in finishing work. Their D-head and 34° angled strip format suit narrow-crown, high-finish applications where small, discreet fasteners are needed.

Suitable for

• Finish carpentry and trim work
• Door and window framing where discreet fastening is required
• Mouldings, casings and decorative woodwork
• General woodworking tasks using compatible Brad nailers (32/34° strip, D-head)

When it may not be suitable

These brads are intended for finishing tasks and are not suitable where heavy structural strength or load-bearing connections are required. They are also not the optimal choice for use in very hard or frozen timber where larger or specially hardened nails may be needed.

Key specifications

• Length: 50 mm
• Material finish: Galvanized metal
• Coating: Resin-coated legs
• Leg profile: Precision chisel-cut legs for improved penetration
• Head type: D-head
• Strip angle: 34° (compatible with 32/34° brad nailers)
• Pack quantity: 1000 pieces

How to use

Load the 34° D-head brad strips into a compatible Brad nailer designed for No. 32 / 34° strip nails. Adjust the nailer depth setting to ensure the brad is flush or slightly recessed depending on the finish required. Drive nails into the timber with steady pressure; the resin coating and chisel-cut legs assist penetration and holding. For best results, test on a scrap piece to confirm depth and setting before proceeding with the final work.

What to consider before purchase

• Confirm your brad nailer accepts 32/34° strip nails with D-head
• Ensure 50 mm length is appropriate for your material thickness
• Choose galvanized finish for corrosion resistance; stainless options may be available for high-corrosion environments

Usage recommendations

Use these Rapid Tools No. 32 galvanized, resin-coated brads for finish carpentry, trim and moulding where a small, discreet fastener is required; test settings on scrap wood and adjust nailer depth for a clean finish.