Blind rivet Rapid Tools High performance Ø4.0 x 14 mm, aluminium/steel, pack of 50

Rapid Tools High performance blind rivet Ø4.0 x 14 mm is a single-sided permanent fastening solution with an aluminium body and a steel mandrel. Designed for use where access is available from only one side, the rivet suits a variety of exposed applications. The pack contains 50 rivets and includes a correctly sized drill bit for installation.

Advantages

These aluminium-body, steel-mandrel blind rivets provide corrosion-resistant clamping with a durable mandrel for reliable setting. The configuration is intended to give consistent blind riveting performance in thin to medium material stacks while the supplied drill bit simplifies preparation.

Suitable for

• Attaching mudguards and wheel arch trims
• Securing metal and plastic coverings or panels
• Fixing signage and thin metal sheeting
• Applications requiring single-sided access with blind-rivet pliers

When it may not be suitable

This rivet is designed for material thicknesses around 8–10 mm (stack thickness) and a 4.0 mm tail diameter; it is not intended for thick structural joins or where higher shear or tensile loads are specified. For stainless-steel body requirements or use in highly corrosive environments, alternative rivet materials or coatings may be more appropriate.

Key specifications

• Rivet diameter: 4.0 mm
• Rivet length: 14 mm
• Recommended material stack thickness: 8–10 mm
• Body material: aluminium
• Mandrel material: steel (appearance like stainless steel)
• Quantity per pack: 50 pieces
• Includes drill bit sized for the rivet

How to use

Drill a hole of the correct diameter through the materials to be joined using the included drill bit. Insert the blind rivet into the hole, position the rivet gun or blind-rivet pliers over the mandrel, and operate the tool until the mandrel breaks and the rivet forms a secure blind head. Remove the spent mandrel from the tool and check the joint for secure clamping.

What to consider before purchase

• Confirm the combined thickness of materials to ensure it falls within the 8–10 mm recommended range
• Verify compatibility with your blind-rivet pliers or rivet gun
• Consider environmental exposure and whether aluminium body with a steel mandrel is suitable

Usage recommendations

Use the supplied drill for the correct hole size, apply steady tool pressure when setting the rivet, and replace the mandrel-catching container regularly to keep the tool operating cleanly. For repeat or heavy-duty applications, inspect joints periodically for corrosion or loosening.