Blind rivet Rapid Tools 4.8 x 12 mm, stainless steel/aluminium, 50 pcs

Blind rivet Rapid Tools 4.8 x 12 mm with a stainless steel mandrel and aluminium head provides a permanent, one-sided fastening solution for joining metal sheets, plastic panels and other thin materials. Supplied in a pack of 50 pieces with a drill included in the packaging, these rivets are intended for applications where access is available only from one side and a neat finished appearance is required.

Advantages

These aluminium-headed blind rivets combine the corrosion resistance of stainless steel mandrels with the lighter weight and visual finish of aluminium heads. They are sized for a 4.8 mm tail diameter and 12 mm body length, and come 50 pieces per FSC carton, with a drill included for correct hole preparation.

Suitable for

• Securing mudguards and wheel arch trims
• Fixing metal and plastic coverings or panels
• Attaching signage and light metal sheeting
• General repair work and light construction tasks

When it may not be suitable

These rivets are designed for material thicknesses of approximately 6–9 mm; they are not suitable for very thin sheet metal below the specified grip range or for heavy structural joints that require high shear or tensile strength beyond typical blind rivet capabilities. They are intended for applications where the specified 4.8 x 12 mm dimensions match the design requirements.

Key specifications

• Rivet body length: 12 mm
• Mandrel/tail diameter: 4.8 mm
• Grip range (material thickness): 6–9 mm
• Head material: high-grade aluminium
• Mandrel material: stainless steel
• Quantity per pack: 50 pieces
• Packaging: FSC carton box; drill included

How to use

Drill a hole of the correct diameter through the joined materials using the supplied drill. Insert the blind rivet into the hole so the head sits flush against the surface, then use a compatible blind rivet gun to pull the mandrel until the rivet body deforms and clamps the materials together. Break off the mandrel at the designed break point and discard the spent mandrel. Ensure the rivet gun is compatible with 4.8 mm rivets and follow the tool manufacturer's safety instructions.

What to consider before purchase

• Measure combined material thickness to confirm it falls within the 6–9 mm grip range
• Confirm hole diameter and drill size match the 4.8 mm rivet tail
• Verify the chosen rivet materials suit the environmental conditions (corrosion exposure)
• Ensure compatibility with your blind rivet gun (tool capacity for 4.8 mm mandrels)

Usage recommendations

For reliable joints, use the included drill to prepare clean holes, apply rivets where material edges are supported, and use a rivet gun rated for 4.8 mm mandrels. For outdoor or corrosive environments consider additional material compatibility checks before installation.