Blind rivet Rapid Tools High performance Ø3.2 x 6 mm, aluminium/steel, pack of 50

Blind rivet Rapid Tools High performance Ø3.2 x 6 mm is a small-diameter aluminium-bodied rivet with a steel mandrel, designed for permanent blind fastening in thin sheet, metal and mixed-material assemblies. The rivets are supplied in a pack of 50 and include a correctly sized drill bit in the packaging. The product is compatible with common manual and pneumatic blind riveting tools intended for this size.

Advantages

These high-performance aluminium rivets combine a lightweight corrosion-resistant head with a stronger steel pin to provide reliable blind fastening where access is available from one side only. The inclusion of a drill bit in the pack simplifies installation preparation and the compact Ø3.2 x 6 mm dimensions make the rivets suitable for small-diameter applications in thin materials.

Suitable for

• Securing mudguards and wheel arch linings
• Fixing metal or plastic cladding and coverings
• Attaching signage and thin metal sheeting
• Assemblies combining metal and non-metal materials where a blind, permanent fastener is required

When it may not be suitable

These rivets are designed for thin materials with a grip range of approximately 1–3 mm and are not intended for thick structural joints or heavy-load bearing connections. They are not suitable for environments requiring high shear or tensile loads beyond the capabilities of small-diameter blind rivets.

Key specifications

• Rivet body material: aluminium
• Mandrel/pin material: steel
• Head/tail diameter: 3.2 mm
• Length: 6 mm
• Recommended material thickness (grip range): 1–3 mm
• Quantity per pack: 50 pieces
• Packaging: FSC cardboard box, drill bit included

How to use

Drill a 3.2 mm hole through the materials to be joined, align the rivet through the hole, and position the rivet gun so the mandrel sits in the tool nosepiece. Compress the rivet gun according to the tool instructions until the mandrel snaps and the rivet sets. Remove the spent mandrel from the tool and check the joint for a secure, flush installation.

What to consider before purchase

• Ensure the combined thickness of materials to be joined is within 1–3 mm grip range.
• Verify your rivet tool supports Ø3.2 mm rivets and the specified mandrel diameter.
• Consider corrosion requirements; aluminium bodies with steel mandrels are suitable for many applications but may not suit highly corrosive environments without additional protection.

Usage recommendations

For best results use a compatible nosepiece for 3.2 mm rivets and test on scrap material to confirm hole fit and tool settings. Tighten drilling speed and support thin panels during drilling to avoid deformation.