Rawlplug R-PLS-16085-10 Mesh Sleeve 16x85mm, 10 pieces

The Rawlplug R-PLS-16085-10 mesh sleeve is a professional-grade accessory designed to facilitate secure anchoring in hollow masonry and perforated materials. Measuring 16x85mm, this sleeve is engineered to work in conjunction with chemical anchors, ensuring that the resin is distributed evenly within the cavity. By creating a controlled environment for the anchor, it prevents the resin from flowing into voids, thereby guaranteeing a strong and reliable bond in substrates that would otherwise be difficult to secure.

Advantages

The primary benefit of using this mesh sleeve is its ability to optimize the consumption of chemical resin while maximizing the load-bearing capacity of the anchor. Its robust construction ensures that the sleeve maintains its shape during installation, providing a stable foundation for threaded rods or studs. By effectively containing the resin, it allows for a precise and clean installation process, reducing waste and ensuring that the structural integrity of the fastening point is maintained even in porous or hollow materials.

Suitable for

• Hollow bricks and blocks
• Perforated masonry materials
• Renovation projects requiring secure wall fixings
• Installation of threaded rods in porous substrates

When it may not be suitable

This mesh sleeve is specifically designed for hollow or perforated materials and is not intended for use in solid concrete or dense stone, where a mesh sleeve is unnecessary and may impede the installation of the anchor. It should not be used in applications where the hole diameter significantly exceeds the sleeve dimensions, as this may compromise the stability of the connection.

Key specifications

• Dimensions: 16x85mm
• Material: Durable synthetic mesh
• Compatibility: Chemical injection anchors
• Application: Hollow and perforated masonry

How to use

To use the mesh sleeve, first drill a hole of the appropriate diameter into the masonry. Clean the hole thoroughly to remove any dust or debris that could interfere with the resin bond. Insert the mesh sleeve fully into the hole until it sits flush with the surface. Using a professional injection tool, fill the sleeve with the chemical resin starting from the bottom to avoid air pockets. Once filled, insert the threaded rod or stud into the sleeve with a slow, rotating motion to ensure full coverage. Allow the resin to cure according to the manufacturer's instructions before applying any load.

What to consider before purchase

• Verify the diameter of the hole matches the 16mm sleeve size
• Ensure the depth of the hole is sufficient for the 85mm length
• Check compatibility with your specific chemical anchor resin
• Confirm the substrate type is hollow or perforated masonry

Usage recommendations

Always wear appropriate personal protective equipment when handling chemical resins and ensure the work area is well-ventilated during the installation process.