RAWLPLUG facade anchor R-TFIX-8M 8 mm x 295 mm with metal drive pin, pack 100

RAWLPLUG R-TFIX-8M 8 mm x 295 mm is a facade anchor designed for mechanical fixing of insulation boards, cladding and lightweight façade elements to masonry and concrete substrates. Supplied with a metal drive pin, the anchor combines an 8 mm diameter shank and a 295 mm length to reach through insulation layers and engage the base substrate. The pack of 100 anchors supports larger installation projects and on-site workflows by providing a consistent fastening solution for external thermal insulation composite systems (ETICS) and panelised façades.

Advantages

The anchor offers reliable mechanical retention where chemical adhesives or mechanical-only systems need reinforcement. Its metal drive pin increases shear and pull-out resistance while facilitating quick installation with a hammer drive. The long shank length is suitable for securing thicker insulation layers and provides consistent embedment depth in common masonry and concrete substrates. Packaging in a 100-piece pack reduces downtime by supplying installers with a ready quantity for larger façade runs.

Suitable for

• Fixing external thermal insulation composite systems (ETICS)
• Securing façade panels and lightweight cladding
• Anchoring through mineral wool, expanded polystyrene (EPS) or similar insulation materials
• Mechanical reinforcement of adhesive-bonded insulation on masonry and concrete

Key specifications

• Anchor diameter: 8 mm
• Overall length: 295 mm
• Drive pin: metal hammer-drive pin for mechanical expansion and shear resistance
• Intended substrates: masonry and concrete
• Pack quantity: 100 pieces

How to use

Drill a hole through the insulation and into the base substrate to the required depth using a drill bit matched to the 8 mm anchor diameter. Clean the hole of dust and debris, insert the anchor shank through the insulation so the expandable section engages the drilled base material, then drive the metal pin using a hammer until the head is flush with the anchor collar. Ensure anchors are spaced and positioned according to the ETICS or cladding manufacturer's guidance to achieve the specified mechanical retention.

Usage recommendations

For reliable performance, verify substrate condition and drill depth before installation, avoid use in hollow or severely deteriorated masonry without appropriate inserts, and follow relevant national standards and façade system supplier instructions for anchor spacing, thermal bridge considerations, and corrosion protection where required.