RAWLPLUG R-TFIX-8S 8×115 mm screw-in façade anchor without spray — pack 200

RAWLPLUG R-TFIX-8S 8×115 mm screw-in façade anchor is a mechanical fixing designed for no-spray façade installations. Supplied in a pack of 200, the anchor is intended for secure fastening of insulation boards, cladding profiles and lightweight façade elements to solid masonry and concrete substrates. The design enables direct screw-in installation without mortar spray, and the product is compatible with RAWLPLUG tool finishes in grey surface and black countersink.

Advantages

The screw-in façade anchor provides uniform mechanical fixation with consistent embedment depth and reliable pull-out resistance in appropriate substrates. Supplied in bulk packaging of 200 pieces, it supports efficient site logistics and continuous installation workflows. The anchor’s geometry and materials are selected to facilitate screw-driven installation into masonry and concrete while ensuring compatibility with standard façade fixing tools and countersinks.

Suitable for

• Fastening thermal insulation boards to masonry and concrete
• Fixing cladding profiles and lightweight façade panels
• Mechanical anchoring where spray-applied mortar is not used
• Large-scale façade installations requiring bulk anchors

Key specifications

• Anchor type: screw-in façade anchor designed for mechanical fixing without mortar spray
• Dimensions: 8 mm diameter × 115 mm length
• Packing: 200 pieces per pack for prolonged installation runs
• Suitable substrates: solid masonry and concrete
• Surface/finish compatibility: intended for use with grey surface and black countersink tool finishes

How to use

Select appropriate drill bit and pre-drill hole to the specified diameter and depth for the 8×115 mm anchor into masonry or concrete. Clean the drilled hole of dust and debris before installation. Position the anchor through the insulation board or panel and screw in until the required embedment and countersink depth are achieved according to project specifications. Check alignment and tightness; ensure that the anchor head and countersink finish are flush with the visible surface where applicable.

Usage recommendations

Use anchors only in suitable substrates; verify load requirements and spacing according to façade system design and local regulations. For best results, combine the anchor with compatible RAWLPLUG tools and countersinks as specified by the façade installer. Store packs in a dry place and handle on-site to avoid contamination of threads and heads prior to installation.