RAWLPLUG R-TFIX-8S-215 screw-in facade anchor 8×215 mm with overmolding, package 100

The RAWLPLUG R-TFIX-8S-215 screw-in facade anchor is a specialized fastener designed for secure fixing in facade systems and thermal insulation panels. It has an 8 mm diameter and 215 mm length with overmolding to improve grip and protect the insulation surface. Supplied in a pack of 100, this anchor is intended for use where driven or screwed anchors are required for external claddings and support profiles.

Advantages

The overmolding provides improved load distribution on insulation materials and reduces the risk of damage to the insulating layer. The screw-in design allows easier installation and controlled embedment depth compared with plain driven anchors. Available in a bulk pack, the set reduces handling time on site and is suitable for repeated fastening operations. The anchor’s geometry is optimized for secure holding in common insulation substrates used in facade assemblies.

Suitable for

• Fastening thermal insulation panels to masonry or concrete facades
• Securing external cladding profiles and rails
• Installation of insulation systems in new build and renovation projects
• Applications requiring driven or screwed anchors with overmold protection

Key specifications

• Diameter: 8 mm
• Length: 215 mm
• Type: screw-in facade anchor with overmolding
• Packaging: pack of 100 anchors
• Primary use: fastening insulation and external claddings

How to use

Select an appropriate drill bit and drill a pilot hole to the required depth in the substrate. Clean the hole of dust and debris before insertion. Insert the screw-in anchor through the insulation panel into the substrate and rotate until the anchor reaches the correct embedment depth and the overmold sits flush with the insulation surface. If required, secure the fixing with the matching screw or cap per system instructions. Follow local installation rules and applicable load tables for spacing and edge distances.

Usage recommendations

Use the anchor in substrates compatible with screw-in fixings and confirm load-bearing capacity with manufacturer guidance. Store the pack in a dry area and handle anchors with common protective equipment. For critical or high-load applications, verify suitability with an engineer or consult RAWLPLUG technical documentation for recommended drill diameters and embedment depths.