Uninterruptible Power Supply Rebel Micropower 600 — offline UPS 600VA/360W 230V 50Hz

The Rebel UPS Micropower 600 is an offline uninterruptible power supply rated at 600 VA / 360 W designed to provide temporary power and basic voltage protection for home or small office equipment. It operates from a 220–240 V AC input and provides a modified sine wave output at 50 Hz with +/-10% voltage regulation on battery and frequency regulation of +/-1 Hz during battery operation. The unit includes a built-in 12 V / 7 Ah battery and typical transfer time from mains to battery is 2–6 ms.

Advantages

This UPS offers compact dimensions and straightforward offline topology for reliable short-term backup power and basic surge/undervoltage protection. It features full protection against battery overcharge, deep discharge and overload, and a relatively short battery charging time (approximately 6–8 hours to 90% when fully discharged). The device is lightweight for its capacity and suitable for simple setups where modified sine wave output is acceptable.

Suitable for

• Home desktop PCs and monitors with moderate power draw
• Small office equipment such as routers, modems and network switches
• Peripherals like external drives, printers and VoIP phones

When it may not be suitable

This offline UPS provides a modified sine wave output, which may not be appropriate for sensitive medical devices, precision laboratory instruments, certain modern power supplies or high-end audio equipment that require a pure sine wave. Also, the 360 W output limits its use with high-power workstations, gaming PCs or multiple power-hungry devices running simultaneously.

Key specifications

• Rated power: 600 VA / 360 W
• Input voltage: 220–240 V AC; operating range 162–290 V AC
• Output waveform: modified sine wave
• Output voltage regulation (battery): +/-10%
• Output frequency: 50 Hz (selectable 50/60 Hz); frequency regulation on battery +/-1 Hz
• Built-in battery: 12 V / 7 Ah (1 unit)
• Battery charge time: ~6–8 hours to 90% from full discharge
• Typical transfer (switching) time: 2–6 ms
• Protections: overcharge, deep discharge and overload protection
• Dimensions (W x H x D): 298 x 101 x 142 mm
• Weight: 4.35 kg
• Operating temperature range: 0 °C to 40 °C

How to use

Connect the UPS to a grounded mains outlet and plug the protected equipment into the UPS output sockets. Ensure the total load does not exceed 360 W. Allow the UPS to charge the battery for the recommended 6–8 hours after first installation for optimal capacity. In the event of mains failure the unit will switch to battery power within the typical 2–6 ms; monitor connected equipment and shut down systems properly if extended runtime is required.

What to consider before purchase

• Check combined power draw of intended devices does not exceed 360 W
• Confirm devices are compatible with modified sine wave output
• Consider required runtime — the internal 12 V / 7 Ah battery provides short backup only
• Ensure installation location is within 0–40 °C and has adequate ventilation

Usage recommendations

Use the Rebel UPS Micropower 600 for short-term backup and basic voltage protection of single workstations, routers and peripherals; perform regular battery checks and replace the internal battery according to usage and manufacturer's guidance to maintain reliable backup performance.