Car speaker Renegade RX6.2C Oval 2-way, 200 W peak, 100 W RMS, 5.7 cm mounting depth, 14.3 cm hole

Renegade RX6.2C Oval 2-way car speaker is designed for in-vehicle audio upgrades where space is limited but improved clarity is required. This speaker delivers 200 W peak and 100 W RMS power with a 4 Ω impedance and a 2-way design that separates low and high frequencies. The shallow 57 mm mounting depth and 143 mm mounting hole diameter make it suitable for many door and rear deck installations, and the included inline crossover with a 20 mm neodymium tweeter provides balanced frequency distribution across the 60 Hz–20 kHz response range.

Advantages

The RX6.2C provides clear midrange and treble reproduction through a dedicated neodymium tweeter while the woofer handles lower frequencies for reduced distortion. Its compact mounting dimensions allow fitment in confined factory locations without significant modification. The 4 Ω impedance and 100 W RMS rating make the speaker compatible with a wide range of factory and aftermarket head units or amplifiers, and the inline crossover ensures proper frequency splitting for reliable performance.

Suitable for

• Replacing factory door speakers in cars with limited mounting depth
• Rear deck installations where an oval 2-way speaker is needed
• Upgrading factory systems to achieve clearer highs and balanced mids
• Use with low- to mid-power aftermarket amplifiers and head units

Key specifications

• Speaker type: Oval 2-way car speaker
• Power handling: 100 W RMS, 200 W peak
• Impedance: 4 Ω
• Frequency response: 60 Hz – 20 kHz
• Tweeter: 20 mm neodymium
• Crossover: Capsuled inline crossover
• Mounting depth: 57 mm
• Mounting hole diameter: 143 mm

How to use

Install the Renegade RX6.2C in a compatible speaker location by removing the existing speaker grille and mounting hardware, verifying the 143 mm hole and 57 mm depth are available. Connect the speaker leads to the vehicle wiring ensuring correct polarity, and mount the speaker securely using appropriate screws or clips. Fit the inline crossover between the amplifier/head unit outputs and the speaker terminals according to the supplied wiring diagram. Test at low volume first to confirm polarity and secure connections before normal use.

Usage recommendations

For best results, use the RX6.2C with head units or amplifiers that can deliver clean power near the RMS rating. Ensure proper door sealing and damping to minimize panel resonance and improve bass response. When replacing factory speakers, verify mounting dimensions and, if required, use adapter brackets to achieve a secure fit. Avoid driving the speaker at high volumes for prolonged periods to prevent thermal or mechanical damage.