3D printer filament Renkforce ABS 1.75 mm 1 kg White

Renkforce ABS 3D printer filament, 1.75 mm diameter on a 1 kg spool in white, is a general-purpose thermoplastic filament formulated for FDM/FFF 3D printing. It provides the stiffness and heat resistance typical of ABS materials and is intended for printing functional parts, prototypes and mechanical components. The filament is suitable for printers that accept 1.75 mm ABS and is compatible with standard extrusion temperatures and bed adhesion methods used for ABS.

Advantages

This ABS filament offers consistent diameter and uniform extrusion to reduce printing defects and improve layer adhesion in functional prints. Its material properties provide good toughness and moderate heat resistance, enabling durable printed parts that can withstand machining and standard post-processing methods such as sanding, filing and gluing. The white colour gives a neutral base for painting or surface finishing.

Suitable for

• Functional prototypes and mechanical parts
• Covers, enclosures and fixtures requiring stiffness and impact resistance
• Printed parts that will be sanded, glued or painted after printing
• Small batch production and replacement components for tools or appliances

Key specifications

• Material: ABS (acrylonitrile butadiene styrene)
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: White
• Recommended extrusion temperature range: typical for ABS (refer to printer and material guidance)
• Suitable printing technology: FDM/FFF

How to use

Load the 1.75 mm ABS filament into a compatible FDM/FFF 3D printer following the printer manufacturer’s filament loading instructions. Set the extrusion temperature and heated bed temperature according to your printer’s guidance for ABS; allow sufficient bed adhesion using a heated bed, appropriate surface (such as PEI sheet or ABS slurry) or adhesive aids. Print with appropriate cooling, retraction and print speed settings for ABS to minimize warping and stringing. After printing, allow parts to cool on the bed to reduce internal stresses before removal and proceed with any sanding, filing or gluing steps as required.

Usage recommendations

Store the filament in a dry environment, ideally in sealed packaging with desiccant to prevent moisture uptake that can cause printing issues. If filament becomes damp, dry it according to recommended filament-drying procedures before use. Test and fine-tune print settings on small calibration models to achieve optimal layer adhesion and dimensional accuracy.