Elbow pipe connector Ricom model PP60/100B90V — PP to PP 87° fitting DN60/100

Ricom PP60/100B90V is a polypropylene elbow pipe connector designed to join DN60 and DN100 PP pipes at an 87° angle. Intended for drainage and sewage installations where a near-right-angle change of direction is required, the fitting provides a reliable PP-to-PP connection that preserves material compatibility across the run. The connector’s geometry allows integration into systems using DN60 and DN100 diameter pipes without introducing dissimilar materials at the joint.

Advantages

This Ricom elbow offers corrosion-resistant polypropylene construction and a tailored 87° angle to suit layouts that need a slightly reduced angle compared with a standard 90° elbow. The product ensures a consistent material interface when connecting PP to PP pipes and supports common drainage and sewage system requirements. The design minimizes turbulence at the joint and facilitates straightforward installation into matching PP pipe systems.

Suitable for

• Residential and commercial drainage runs requiring a change of direction between DN60 and DN100 pipes
• Sewage system sections where a non-standard elbow angle (87°) is needed for routing
• Renovation or repair work in PP piping networks maintaining material consistency
• Applications where corrosion resistance and chemical stability of PP are required

Key specifications

• Material: polypropylene (PP)
• Connection type: PP-to-PP elbow fitting
• Pipe diameters supported: DN60 and DN100
• Angle: 87° elbow
• Application: drainage and sewage systems

How to use

Confirm compatibility of the existing pipe system with polypropylene material and the DN60/DN100 diameters before installation. Prepare pipe ends by cleaning and deburring to ensure a smooth fit. Align the PP60/100B90V elbow so that the DN60 and DN100 ends match the corresponding pipes, then assemble according to the pipe system’s recommended joining method for PP fittings (for example, solvent welding or rubber-sealed push-fit methods where applicable). Verify alignment and slope for gravity drainage, and test the assembled run for leaks following installation.

Usage recommendations

Use the elbow in systems that maintain the same PP material to avoid incompatible joints. Ensure proper slope for drainage lines and avoid exposing the fitting to temperatures or chemicals outside the polypropylene material’s specifications. Follow local plumbing codes and manufacturer guidance for joining methods and leak testing.