Roadinger steel cabinet SSC-36 with glass door 36U 19" rack, load capacity 200 kg, 60x60x179 cm

Roadinger steel cabinet SSC-36 is a floor-standing server and network cabinet with a transparent glass front door and integrated 19" 36U rack rails. The cabinet is constructed from steel to provide physical protection for installed equipment while allowing front access and visual inspection through the glass door. It supports a static load capacity of 200 kg and has external dimensions of approximately 60 x 60 x 179 cm, making it suitable for small server rooms, network closets and AV installations where a compact, lockable enclosure with rack mounting is required.

Advantages

The SSC-36 combines a rigid steel structure with a glass door that permits quick visual checks without opening the cabinet. Integrated 19" rack rails with 36U mounting height accept standard rack equipment, and the 200 kg static load rating covers typical servers, switches and audio/video components. The cabinet’s footprint of 60 x 60 cm and 179 cm height balance usable rack space with compact floor placement, while the lockable front door improves physical security for installed devices.

Suitable for

• Small to medium server rooms and IT closets
• Network distribution and patching equipment
• Audio/video racks and AV installations
• Secure storage of switches, routers and compact servers

When it may not be suitable

This cabinet may not be suitable where higher load capacities or larger mounting depths are required; the static load rating of 200 kg and the internal depth defined by 60 cm external dimensions limit very heavy or deep equipment. It is also not intended as a fully sealed environmental enclosure — if dust, moisture or strict thermal management are critical, a cabinet with dedicated sealing, enhanced cooling or climate control should be considered.

Key specifications

• Construction material: steel
• Front door: glass, lockable
• Rack type: 19" integrated rails
• Mounting height: 36U
• Static load capacity: 200 kg
• External dimensions (approx.): 60 x 60 x 179 cm (W x D x H)
• Application: floor-standing server/network cabinet

How to use

Place the cabinet on a stable, level floor that can support the combined weight of the cabinet and installed equipment. Open the glass front door using the lock mechanism and install 19" rack equipment into the 36U rails, securing devices with appropriate rack screws and cage nuts. Route power and network cabling through available openings or cable management features at the rear or base, and balance loads to remain within the 200 kg static limit. Ensure adequate airflow around the cabinet and maintain clearance at front and rear for access and ventilation.

What to consider before purchase

• Verify the mounting depth and internal usable depth for your equipment
• Confirm total equipment weight does not exceed 200 kg static load
• Check required ventilation, cooling and cable-entry options for your setup
• Confirm the cabinet footprint (60 x 60 cm) fits available floor space and door clearances

Usage recommendations

Install heavier devices toward the bottom of the rack to improve stability, use proper rack-mount hardware, and provide separate power distribution units or PDUs for organized power management. If the installation requires active cooling or environmental protection, integrate rack fans or place the cabinet in a conditioned room.