Rocker Switch DPDT EB1740239260 16A 250VAC — Double Pole Double Throw electrical switch

DPDT rocker switch EB1740239260 is a double pole double throw electrical switch rated for 16A at 250VAC. The component is designed to switch two separate circuits simultaneously, providing a compact panel-mount solution with a rocker actuator for clear on/off or changeover positions. Its construction suits control panels, small appliances and equipment where reversing of polarity or selecting between two circuit paths is required.

Advantages

The DPDT design enables simultaneous control of two independent circuits, reducing wiring complexity when implementing changeover or reversing functions. With a 16A 250VAC rating, the switch supports common mains-level loads used in appliances and control equipment. The rocker actuator delivers tactile feedback and visible position indication, while the panel-mount form factor allows straightforward integration into control enclosures and instrument panels.

Suitable for

• Control panels and operator consoles requiring circuit changeover
• Appliances and equipment that need reversing or polarity switching
• Prototyping and small-scale electrical assemblies
• Switching dual-phase or two separate low- to moderate-current circuits

Key specifications

• Switch type: Double Pole Double Throw (DPDT)
• Actuator: Rocker
• Rated current: 16 A
• Rated voltage: 250 VAC
• Mounting: Panel-mount
• Contacts: Changeover configuration for two poles

How to use

Mount the switch into a cutout in the panel according to the panel-mount dimensions. Wire each pole to its respective circuit using appropriate gauge conductors for the 16A rating, ensuring secure terminal connections and observing correct polarity and insulation. Use the rocker to select the desired contact position; the DPDT configuration allows swapping or isolating two circuits simultaneously. Verify installation by measuring continuity in each switch position before applying full mains voltage.

Usage recommendations

Use conductors sized for the intended current and protection devices (fuses or breakers) rated for the connected load. Avoid exceeding the 16A 250VAC rating and ensure the switch is installed in a dry, ventilated panel area. For motor reversing or inductive loads, consider contact protection (such as snubbers or RC networks) to extend contact life.