Charging case RØDE Chargingcase+ for Wireless GO (Gen 3) — Rode compatible charging case

RØDE Chargingcase+ for Wireless GO (Gen 3) is a dedicated charging and transport solution designed to store, protect and recharge a full Wireless GO (Gen 3) kit. The compact case contains an integrated battery and internal connections that allow simultaneous charging of the two transmitters and receiver using a single USB‑C cable. It also enables access to on‑board recordings, adjustment of unit settings and firmware updates while the units remain safely stowed.

Advantages

The Chargingcase+ combines protective storage and mobile power in one compact unit. Its integrated 4200 mAh battery supports two full recharges, extending total system runtime up to approximately 21 hours without an external power source. A rugged outer shell and zip closure protect the transmitters and receiver from knocks during transport, while internal ports provide simultaneous charging and data access so you can transfer recordings or update firmware for all three units at once. Charging status LEDs indicate battery and charge progress for convenient monitoring.

Suitable for

• Content creators who use the Wireless GO (Gen 3) system and need compact on‑the‑go charging.
• Field recordists and journalists requiring protected transport and extended battery life during shoots.
• Remote interview setups where simultaneous charging and quick access to recordings or firmware updates is needed.
• Users who travel frequently and prefer a single, consolidated case for their Wireless GO (Gen 3) kit.

When it may not be suitable

The Chargingcase+ is designed specifically for the Wireless GO (Gen 3) family; it is not intended as a universal charger for devices that do not physically fit the internal compartments or share the same charging/data interface. If you need a high‑capacity external battery for powering other gear for extended periods, a larger power bank with higher capacity may be more appropriate.

Key specifications

• Compatibility: Designed for Wireless GO (Gen 3) transmitter and receiver units from Rode
• Integrated battery capacity: 4200 mAh
• Provided recharges: Up to two full recharges for the Wireless GO (Gen 3) kit (approx. 21 hours total runtime)
• Charging/data interface: USB‑C connection for charging and simultaneous data access
• Simultaneous charging: Supports charging of both transmitters and the receiver at the same time
• Construction: Rugged exterior with zip closure for protective transport
• Color: Black

How to use

Place the Wireless GO (Gen 3) transmitters and receiver into their designated compartments inside the Chargingcase+, close the zip and connect a USB‑C cable to the case to begin charging the integrated battery or to top up the internal units. While connected to a computer via USB‑C, the case provides data access to each unit so you can transfer recordings, change settings or perform firmware updates. Monitor charging progress and battery level using the charging status LEDs on the case.

What to consider before purchase

• Ensure you own or plan to use Wireless GO (Gen 3) transmitters and receiver, as the case is tailored to that system.
• Confirm that the 4200 mAh integrated battery and up to two recharges meet your expected on‑site runtime needs.
• Check that the USB‑C charging/data workflow matches your current recording and transfer setup.
• If you require charging for additional non‑Wireless GO devices, verify physical fit and compatibility separately.

Usage recommendations

Store units in the case when not in use to protect them from impact and to keep batteries topped up between sessions. When transferring files or performing firmware updates, connect the Chargingcase+ to a computer via the USB‑C port to access all units simultaneously. Avoid exposing the case to prolonged moisture or extreme temperatures to preserve battery health and case integrity.