Samee Filtr skośny separator with magnet and drain valve 3/4 - PMGZ20

Samee Filtr skośny PMGZ20 is an inline angled filter-separator with an integrated magnet and a drain valve, designed to remove mechanical contaminants and ferrous particles from fluid lines. With a 3/4 connection, it is intended for use in heating, cooling and domestic water systems where protection of circulating equipment and periodic removal of collected debris are required. The inline angled body and removable collection chamber enable straightforward maintenance without major system disassembly.

Advantages

The unit combines mechanical filtration and magnetic separation in a single compact housing, reducing the need for separate components. The angled design promotes efficient sediment settling and facilitates drainage through the integrated drain valve. An internal magnet captures ferrous particles, helping to protect pumps, valves and heat exchangers from wear and blockage. The removable collection chamber and serviceable components allow cleaning without interrupting the entire installation for long periods.

Suitable for

• Residential and commercial heating systems (radiators, boilers, heat pumps)
• Cooling circuits and chillers where particulate and ferrous contamination is present
• Domestic water circulation systems that require occasional flushing of sediment

When it may not be suitable

This filter-separator is intended for removal of mechanical debris and ferrous particles; it is not a replacement for microbiological or chemical water treatment and will not remove dissolved contaminants. Systems with extremely high particulate loads may require a coarse pre-filter to prevent rapid clogging. The 3/4 connection size is suited to small and medium circuits; larger industrial mains may need larger-diameter separators.

Key specifications

• Type: Angled inline filter-separator with magnetic insert
• Connection size: 3/4 inch threaded inlet/outlet
• Drain: Integrated drain valve for periodic removal of collected debris
• Maintenance: Removable collection chamber for manual cleaning
• Typical applications: Heating, cooling and domestic circulation systems

How to use

Install the filter-separator in the return line of the circuit with the angled body oriented so that the collection chamber is accessible for service. Ensure compatible thread sealing and follow system pressure and temperature limits established by the installation. Periodically open the drain valve to remove accumulated sludge and metal particles; for deeper cleaning, isolate the line, depressurize and remove the collection chamber and magnetic insert for manual cleaning. Reassemble and restore system pressure after maintenance.

What to consider before purchase

• Verify that a 3/4 inch connection matches your pipework and any adapters are compatible.
• Confirm system pressure and temperature ranges to ensure material compatibility.
• Assess expected particulate load—install a pre-filter if heavy contamination is anticipated.
• Consider access space for routine drainage and removal of the collection chamber.

Usage recommendations

Regularly schedule visual inspections and drain cycles based on system load; clean the magnetic insert and collection chamber when flow reduction or increased differential pressure is observed. Use thread sealant compatible with potable or heating systems as required, and follow local codes for installation and maintenance.