Bracket SATEL BRACKET B white — mounting bracket, 1 pc

SATEL BRACKET B white is a single-piece mounting bracket designed to support compatible SATEL motion detectors and accessories. The bracket allows wall or ceiling installation and integrates a concealed inner cable duct to hide wiring. Its enclosed design improves the appearance of alarm and security system setups while providing two adjustment stages for horizontal pivot and tilt control.

Advantages

The bracket offers both swivel and tilt adjustments to position a detector accurately: approximately 90° swivel and approximately 30° tilt. The inner cable duct conceals wiring to create a neat, professional finish and reduces visible cables. The fully enclosed shape is suitable for visible installation locations where appearance matters, and the single-piece supply makes it convenient for replacement, repair or new installations.

Suitable for

• Mounting compatible SATEL motion detectors on walls
• Ceiling mounting of detectors in corridors, rooms or hallways
• Replacement of damaged or worn detector holders
• Neat installations where cable concealment is required

Key specifications

• Colour: white
• Supply: single unit (1 pc)
• Mounting options: wall or ceiling
• Swivel adjustment: approx. 90°
• Tilt adjustment: approx. 30°
• Integrated inner cable duct for concealed wiring
• Fully enclosed design to improve installation appearance

How to use

Choose a suitable mounting location on the wall or ceiling, taking into account the detector’s coverage requirements. Feed detector wiring through the bracket’s inner cable duct before fixing the bracket to the surface using appropriate screws and anchors for the substrate. Attach the compatible SATEL detector to the bracket, then adjust the swivel and tilt to set the required detection angle. Ensure secure mechanical fastening and proper electrical connections following the detector manufacturer’s instructions.

Usage recommendations

For best results, mount the bracket at a height and position recommended for the specific detector model, and use suitable fasteners for the mounting surface. Conceal cable runs where possible and verify detector alignment after final adjustment to ensure optimal coverage.