Power feed cable ShiverPeaks BC01 CEE 7/7 to BC01, 5 m (model BS02-40055)

ShiverPeaks PV power feed cable model BS02-40055 is a 5 m mains connection lead with a CEE 7/7 plug compatible with BC01 sockets. It is designed to provide a fixed-length power connection for photovoltaic equipment and other appliances that require a standard CEE 7/7 interface. The cable offers straightforward connectivity for installations and temporary setups where reliable power transmission and a conventional mains plug are needed.

Advantages

The power feed cable delivers a stable electrical connection between BC01-compatible sockets and devices using a CEE 7/7 plug. With a five-metre length it balances reach and manageability for most small-scale PV installations or temporary connections. The cable assembly is intended for mains-voltage use and simplifies the connection process by using a common plug format that is widely compatible with consumer and PV equipment.

Suitable for

• Connecting PV inverters or modules to BC01 sockets where a CEE 7/7 plug is required
• Temporary or semi-permanent power feed installations during maintenance or testing
• Small-scale rooftop or portable photovoltaic systems needing a fixed-length mains lead

When it may not be suitable

This cable is intended for applications requiring a CEE 7/7 plug interface and a BC01-compatible socket; it is not suitable where different plug/socket standards are used without adapters. It also does not replace specialized, hard-wired feeder cables or custom-made leads designed for specific industrial installations and may not meet requirements for environments that demand additional mechanical protection, higher temperature ratings, or specific certifications beyond standard mains use.

Key specifications

• Cable length: 5 metres
• Plug type: CEE 7/7 plug interface
• Socket compatibility: BC01-compatible connection
• Intended use: mains-voltage power feed for PV equipment and appliances

How to use

Inspect the cable and connectors for visible damage prior to use. Ensure that the BC01 socket and the connected device are switched off and meet local installation and safety standards. Insert the CEE 7/7 plug firmly into the BC01-compatible socket until fully seated. Route the cable to avoid sharp edges, heat sources, or tripping hazards and secure it as necessary. After use, disconnect by pulling the plug straight out while the circuit is switched off, and store the cable dry and protected from UV and mechanical damage.

What to consider before purchase

• Confirm that your socket and devices use the CEE 7/7 plug and BC01-compatible connection standard
• Ensure a 5 m cable length meets the distance and routing requirements for your installation
• Verify that mains-voltage rating and local electrical regulations are compatible with the intended use

Usage recommendations

Use the cable only with matching BC01 sockets and appliances designed for CEE 7/7 connections. For permanent or exposed outdoor installations, consider additional protection such as conduit, strain relief, or a cable with higher mechanical or environmental ratings and consult a qualified electrician if unsure about local code compliance.