Network Switch ShiverPeaks BS08-01110, 5‑port 100 Mbps, 5× RJ45, black

ShiverPeaks BS08-01110 is a compact unmanaged network switch with five 100 Mbps RJ45 ports that enables simple wired Ethernet expansion for small offices, home networks, or point-of-sale setups. The black enclosure houses five Fast Ethernet interfaces that provide plug-and-play connectivity without the need for configuration, allowing multiple devices such as PCs, printers, NAS devices and wireless access points to share a single network segment. Its small footprint and fanless design make it suitable for desktop placement or discreet installation inside network cabinets with limited space.

Advantages

This 5-port Fast Ethernet switch offers straightforward installation and immediate operation: connect devices and power, and the switch handles link negotiation and forwarding automatically. The unmanaged design minimizes setup time and maintenance, while the five RJ45 ports provide dedicated wired throughput for each connected device. The device’s solid-state, fanless build reduces noise and moving parts, improving reliability for continuous operation in small environments.

Suitable for

• Small office or home networks that need extra wired ports
• Connecting desktop PCs, printers and network-attached storage to a LAN
• Expanding wired connectivity for wireless access points or IP cameras
• Temporary or permanent deployments where simple plug-and-play operation is required

When it may not be suitable

This switch provides five Fast Ethernet ports at 100 Mbps each and does not offer Gigabit speeds, managed features, VLANs, QoS configuration, or PoE. For networks that require higher throughput between devices, advanced traffic management, or power-over-Ethernet for devices such as some access points and cameras, this unit will not meet those needs. Environments with heavy inter-device traffic, large file transfers, or server-to-server communication typically require switches with Gigabit or higher interfaces and advanced switching features.

Key specifications

• Port count: 5 x RJ45 Fast Ethernet ports
• Data rate per port: 100 Mbps (Full/Half Duplex auto-negotiation)
• Operation mode: Unmanaged, plug-and-play
• Form factor: Compact, desktop / small rack or cabinet friendly
• Cooling: Fanless design for silent operation
• LED indicators: Link/activity per port

How to use

Place the switch on a stable surface near your network devices and a power outlet. Connect each device using standard Ethernet cables (Cat5e or higher recommended for stable 100 Mbps links) to the RJ45 ports. Connect the uplink to your router or modem to provide network and internet access to the connected devices. Power the unit on and verify link/activity LEDs to confirm successful connections. No configuration is required; the switch automatically manages MAC address learning and frame forwarding.

What to consider before purchase

• Required port speed — this switch supports up to 100 Mbps per port, not Gigabit speeds
• Number of devices — ensure five ports are sufficient or consider a larger switch if you need more connections
• Need for managed features — this is an unmanaged switch without VLAN, QoS, or remote management
• Power-over-Ethernet requirement — this unit does not provide PoE for powered devices

Usage recommendations

Use Category 5e or Category 6 cables for reliable 100 Mbps links, place the switch in a ventilated area away from heat sources, and connect the uplink to your router or gateway to share internet access. For mixed networks with Gigabit-capable devices, reserve this switch for endpoints that do not require higher throughput, such as printers or IP phones.